Christie D4K3560 Setup Manual

Christie Projector D4K3560 Setup manual Free PDF Download on Guides-Base.com

Christie D4K3560 Projector PDF Setup manual

  • Model: D4K3560
  • Brand: Christie
  • Type: Setup manual
  • Category: Projector
  • File Size:
  • No. of pages: 36
Download Christie D4K3560 PDF Manual

Christie D4K3560 Summary of Contents:

Page view Summary of Page's Content
1 Page 1 of Christie D4K3560 Setup manual

Christie D4K3560 Manual D4K3560 Setup Guide 020-101161-05 (...)

2 Page 2 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual NOTICES COPYRIGHT AND TRADEMARKS Copyright ©2015 Christie Digital Systems USA Inc. All rights reserved. All brand names and product names are trademarks, registered trademarks or trade names of their respective holders. GENERAL Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this document. Christie reserves the right to make change (...)

3 Page 3 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual CAN ICES-3 (A) / NMB-3 (A) 이 기기는 업무용 (A 급 ) 으로 전자파적합등록을 한 기기이오니 판매자 또는 사용자는 이점을 주의하시기 바라며 , 가정 외의 지역에서 사용하는 것을 목적으로 합니다 . Environmental The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical and electronic equ (...)

4 Page 4 of Christie D4K3560 Setup manual

Christie D4K3560 Manual D4K3560 Setup Guide 4 020-101161-05 Rev. 1 (06-2015) Content Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety and warning guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Installation safety and warning guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 AC/power precautions . . . . . . . . . . . . . . . (...)

5 Page 5 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Content D4K3560 Setup Guide 5 020-101161-05 Rev. 1 (06-2015) Connect a video source using 3G input card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Connect a video source using HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Connect a video source using DVI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Select a video source . . . . . . . . . . . . . . . . (...)

6 Page 6 of Christie D4K3560 Setup manual

D4K3560 D4K3560 Setup Guide 6 020-101161-05 Rev. 1 (06-2015) Introduction This manual is intended for professionally trained operators of Christie high-brightness projection systems. These operators are qualified to replace the lamp and air filters, but should not attempt to install or service the projector. Only qualified Christie technicians who are knowledgeable about the hazards associated with high- voltage, ultraviolet exposure, and the (...)

7 Page 7 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Introduction D4K3560 Setup Guide 7 020-101161-05 Rev. 1 (06-2015) Installation safety and warning guidelines AC/power precautions To correctly install this projector, a certified electrician must install a permanent three-phase connection to the lamp power supply (LPS). The LPS projector outlet is used to supply power to the projector head. Operate the projector at the recommended voltage. Danger! Failure to comply with the followi (...)

8 Page 8 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Introduction D4K3560 Setup Guide 8 020-101161-05 Rev. 1 (06-2015) Lamp precautions Lamps used in the projector are under high pressure and must be handled with caution. Lamps can explode and cause serious personal injury if dropped or mishandled. Danger! Failure to comply with the following results in death or serious injury. • Never attempt to access the lamp compartment while the lamp is on. Wait at least 10 minutes after the l (...)

9 Page 9 of Christie D4K3560 Setup manual

D4K3560 Introduction D4K3560 Setup Guide 9 020-101161-05 Rev. 1 (06-2015) Product safety labels Indicates the presence of a grounding point. Indicates the presence of an earth grounding point. Indicates the presence of a dangerous condition or situation. Indicates the presence of a pinch hazard. To avoid personal injury, keep hands clear and loose clothing tied back. Indicates the presence of a hot surface. To avoid personal injury, always (...)

10 Page 10 of Christie D4K3560 Setup manual

Christie D4K3560 Manual Introduction D4K3560 Setup Guide 10 020-101161-05 Rev. 1 (06-2015) Indicates the presence of a fire hazard. To avoid personal injury and property damage, always adhere to the instructions described in this manual. Always disconnect all power sources before performing maintenance or service procedures. See the product user manual for specific information and directions. See the product service manual for specific information and (...)

11 Page 11 of Christie D4K3560 Setup manual

Christie D4K3560 Manual D4K3560 Setup Guide 11 020-101161-05 Rev. 1 (06-2015) Installation and Setup Learn how to install, connect, and optimize the projector display. Site requirements To safely install and operate the projector, the installation location must have restricted access for authorized personnel only and meet these minimum requirements. Physical operating environment Provides specifications for the operating environment. • Maximum ambient tempe (...)

12 Page 12 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Installation and Setup D4K3560 Setup Guide 12 020-101161-05 Rev. 1 (06-2015) • 19 mm and 7/8” wrenches • Assorted Allen keys (metric) • Christie approved protective safety clothing if working with the lamp • Lens cleaning tissue and solution Projector components ID Description A Touch panel controller (TPC) A touch-sensitive screen used to control and monitor operation. B LED status indicators LED color and blinking rates (...)

13 Page 13 of Christie D4K3560 Setup manual

Christie D4K3560 Manual Installation and Setup D4K3560 Setup Guide 13 020-101161-05 Rev. 1 (06-2015) G Shroud (two-piece) The shroud covers the motorized lens mount assembly. H Projection lens A variety of projection lenses can be used with the projector. For a list of available lenses, see the D4K3560 User Manual (P/N: 020-101075-XX). I Air filter cover and air filter Filters the intake air before it circulates through the front compartment to cool the (...)

14 Page 14 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Installation and Setup D4K3560 Setup Guide 14 020-101161-05 Rev. 1 (06-2015) Lamp power supply components ID Item Description A Extractor AC power outlet Powers an approved extractor unit. Do not use this outlet to power other devices. B Projector AC power outlet Powers the projector head. Do not use this outlet to power other devices. C Main LPS breaker Acts as a power switch, protecting the lamp power supply (LPS) against over- cu (...)

15 Page 15 of Christie D4K3560 Setup manual

Christie D4K3560 Setup manual Installation and Setup D4K3560 Setup Guide 15 020-101161-05 Rev. 1 (06-2015) Position the projector 1. Position the projector at an appropriate throw distance (projector-to-screen distance) and vertical position. Ideally, center the projector with the screen. If space is limited, aim the projector slightly off-center. This increases side keystoning, but reduces the horizontal lens offset required. Keep the projector lens as perpen (...)

16 Page 16 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Installation and Setup D4K3560 Setup Guide 16 020-101161-05 Rev. 1 (06-2015) 6. Assemble the three-piece airflow duct (supplied with LPS). First snap the two L shaped parts together, and then snap this into the six stand out pins of the third piece (flat panel). 7. Position the airflow duct directly behind the LPS. 8. Insert airflow duct into rack stand from the outside. 9. Secure airflow duct to rack stand using screws from the rac (...)

17 Page 17 of Christie D4K3560 Setup manual

D4K3560 Installation and Setup D4K3560 Setup Guide 17 020-101161-05 Rev. 1 (06-2015) Connect the lamp power supply 1. Ensure the power is disconnected from the lamp power supply (LPS). 2. Loosen three screws to remove the rear lens-side cover. 3. Connect the LPS communication cables: a. Connect one end of the RS232 cable to the lower port on the LPS labeled RS232. b. Connect one end of the Interlock cable to the upper port on the LPS labeled (...)

18 Page 18 of Christie D4K3560 Setup manual

D4K3560 Installation and Setup D4K3560 Setup Guide 18 020-101161-05 Rev. 1 (06-2015) c. Connect the projector end of the cable to the port labeled RS232, located on the underside of the projector chassis. d. Connect the projector end of the Interlock cable to the port labeled Interlock, located on the underside of the projector chassis. 4. Connect the LPS lamp leads: a. Route the positive (+) cable through the upper strain relief in the LP (...)

19 Page 19 of Christie D4K3560 Setup manual

D4K3560 Installation and Setup D4K3560 Setup Guide 19 020-101161-05 Rev. 1 (06-2015) c. Reinstall and secure the LPS side panel with six screws. 6. Connect one end of the line cord into the LPS power connector labeled Projector ONLY. If using the longer DC cable kits, the projector head must be powered separately using Christie recommended line cord provided for your region. 7. Connect the other end of the projector line cord into the plug (...)

20 Page 20 of Christie D4K3560 Setup manual

Christie D4K3560 Setup manual Installation and Setup D4K3560 Setup Guide 20 020-101161-05 Rev. 1 (06-2015) Configuring ballast settings for 200 VAC operation 1. Unplug the LPS from power. 2. Remove the front panel using a Phillips screwdriver. 3. Insert the convenience outlet harness (black) wire into the first position on the terminal block. 4. Tighten the screw to secure the harness in place. Ensure the wire insulation is not crimped under the screw. 5. Slide (...)

21 Page 21 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Installation and Setup D4K3560 Setup Guide 21 020-101161-05 Rev. 1 (06-2015) 2. Remove the front panel using a Philips screwdriver. 3. Insert the convenience outlet harness (black) wire into the second position on the terminal block. 4. Tighten the screw to secure the harness in place. Ensure the wire insulation is not crimped under the screw. 5. Slide the selector switch to the 400V location. 6. Re-attach the front panel. (...)

22 Page 22 of Christie D4K3560 Setup manual

Christie D4K3560 Manual Installation and Setup D4K3560 Setup Guide 22 020-101161-05 Rev. 1 (06-2015) Adjust the projector tilt and level Adjust the projector tilt to fill the maximum amount of screen while minimizing keystone. Lens offset can be used to center the image in the center of the screen.. 1. Secure a safety lifting strap rated to handle the projector weight at the rear of the projector. 2. Hoist up the projector. 3. To adjust the vertical or hor (...)

23 Page 23 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Installation and Setup D4K3560 Setup Guide 23 020-101161-05 Rev. 1 (06-2015) 6. Lock the feet in place by turning each lock nut until it fits tight against the projector. Install the touch panel controller 1. Loosen the mounting arm just enough for the end to fit over the ball joint located on the rear panel of the projector. The touch panel controller (TPC) becomes loose from the mounting arm when the mounting arm lock is loosen (...)

24 Page 24 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Installation and Setup D4K3560 Setup Guide 24 020-101161-05 Rev. 1 (06-2015) Connect the existing outside-venting duct to the 8-inch diameter exhaust port on the top of the projector. Make sure there are no obstructions or bends in the ducting or air intakes and the vane switch at the exit duct moves freely. The pre-installed outside-venting duct should be rigid at the projector and must also include a heat extractor and blower (...)

25 Page 25 of Christie D4K3560 Setup manual

Christie D4K3560 Manual Installation and Setup D4K3560 Setup Guide 25 020-101161-05 Rev. 1 (06-2015) 2. Carefully slide the shroud sideways and forward away from the lens mount and lens. 3. Place the shroud covers on a clean surface to prevent scratches. Set up the lens 1. Remove the projector shroud. 2. Make sure the lens locking lever is in the up position. 3. If attached, remove the rear lens cap from the lens. 4. Slide the lens into the lens mount, ali (...)

26 Page 26 of Christie D4K3560 Setup manual

Christie D4K3560 Manual Installation and Setup D4K3560 Setup Guide 26 020-101161-05 Rev. 1 (06-2015) Setup the lamp The lamp position can be adjusted at any time, using a set of electronically controlled motors. An optimal position for the lamp, with respect to the reflector and the integrator rod, results in maximum brightness. This geometry is software controlled using the LampLOC calibration process. Touch panel controller The touch panel controller (T (...)

27 Page 27 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual D4K3560 Setup Guide 27 020-101161-05 Rev. 1 (06-2015) Connect Devices This section provides information and procedures for connecting external devices to the projector. Communication and input ports are located on the projector side input panel, accessed by removing the input panel cover. When connecting devices, you can route cables through the opening in the frame to the side input panel or directly to the video option cards and MCP (...)

28 Page 28 of Christie D4K3560 Setup manual

D4K3560 Connect Devices D4K3560 Setup Guide 28 020-101161-05 Rev. 1 (06-2015) Four-Port: DDIC card The following table shows the video quadrant mappings for the DDIC Four-Port input configuration: Two-Port: TDPIC card The following table shows the video quadrant mappings for the TDPIC Two-Port input configuration: Two-Port: DDIC card The following table shows the video quadrant mappings for the DDIC Two-Port input configuration: Slot 2 1-In (...)

29 Page 29 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual Connect Devices D4K3560 Setup Guide 29 020-101161-05 Rev. 1 (06-2015) Connect a video source using DisplayPort The Twin DisplayPort input card (TDPIC) accepts digital video data from the DisplayPort sources. The input configurations listed below are supported. Connect a video source using 3G input card The 3G input card (3GIC) accepts digital video data from HD and 3G-SDI (Serial Digital Interface) sources. The input configurations (...)

30 Page 30 of Christie D4K3560 Setup manual

Christie D4K3560 Setup manual Connect Devices D4K3560 Setup Guide 30 020-101161-05 Rev. 1 (06-2015) Connect a video source using HDMI The Twin HDMI input card (THIC) accepts digital video data from HDMI sources. The input configurations listed below are supported. Connect a video source using DVI The Dual Link DVI input card (DDIC) accepts digital video data from DVI sources. It does not support incoming analog signals. The input configurations listed below are (...)

31 Page 31 of Christie D4K3560 Setup manual

Christie D4K3560 Manual Connect Devices D4K3560 Setup Guide 31 020-101161-05 Rev. 1 (06-2015) Select a video source After connecting a video source to the projector, you must select it using the touch panel controller (TPC). 1. On the TPC, select Input > Channel. 2. Scroll the list of channels until you find the channel that best matches your configuration. 3. Tap the channel. An image appears on the screen. If an image does not appear on the screen, re (...)

32 Page 32 of Christie D4K3560 Setup manual

D4K3560 Connect Devices D4K3560 Setup Guide 32 020-101161-05 Rev. 1 (06-2015) 1. On the touch panel controller, tap Menu > Configuration > Ethernet Settings > Modify IP Settings. 2. Set the network information for the projector: • To obtain information automatically from the network, tap Automatic. • To manually enter the network information, tap Manual and enter the IP Address, Subnet Mask and Gateway (optional). 3. Click Ok. (...)

33 Page 33 of Christie D4K3560 Setup manual

D4K3560 Connect Devices D4K3560 Setup Guide 33 020-101161-05 Rev. 1 (06-2015) D4K3560 signal connectivity Input configuration Input format Frame rate (Hz) Interface Cards Cables RGB/ 4:4:4 8-bit RGB/ 4:4:4 10-bit RGB/ 4:4:4 12-bit 4:2: 2 8- bit 4:2:2 10-bit 4:2:2 12-bit Four-Port 4K, QHD 24, 25, 30, 48, 50, 60 DisplayPort 1.1a 2x TDPIC 4 X X X X X Two-Port 4K, QHD 24, 25, 30, 48, 50, 60 DisplayPort 1.1a 2x TDPIC 2 X X Four (...)

34 Page 34 of Christie D4K3560 Setup manual

D4K3560 D4K3560 Setup Guide 34 020-101161-05 Rev. 1 (06-2015) Operation This section provides information and procedures for turning the projector on and off. Projector LED status indicators The table identifies the LED state colors and meaning. Turn the projector on 1. Set the all the breaker switches on the lamp power supply to their on positions. 2. Set the breaker switch on the projector baseplate to the on position. 3. When the projector r (...)

35 Page 35 of Christie D4K3560 Setup manual

D4K3560 Operation D4K3560 Setup Guide 35 020-101161-05 Rev. 1 (06-2015) LED expected behavior on power up The following table shows the expected behavior of the projector LED and the MCPU board power LED on power up: At approximately one minute and 15 seconds, the TPC indicates that it is connected and shows the home page. Turn the projector off 1. On the touch panel controller, tap the Home tab. 2. Tap Power. Action/Event Projector LEDs M (...)

36 Page 36 of Christie D4K3560 Setup manual

Christie D4K3560 Projector Manual For the most current technical documentation, please visit www.christiedigital.com United Kingdom ph: +44 (0) 118 977 8000 United Arab Emirates ph: +971 4 3206688 Spain ph: + 34 91 633 9990 Singapore ph: +65 6877-8737 Republic of South Africa ph: +27 (0)11 510 0094 Korea (Seoul) ph: +82 2 702 1601 Japan (Tokyo) ph: 81 3 3599 7481 India ph: +91 (080) 6708 9999 Germany ph: +49 2161 664540 France ph: +33 (0) 1 41 21 44 04 Eastern Europe (...)

Related Devices for Christie D4K3560