Hitachi CP-X2 - XGA LCD Projector User's Manual

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 1  Projector CPX2/CPX6 User’s Manual – Network Functions This manual is only intended to explain Network Functions. ►Before using this product, read the “User’s Manual – Safety  Guide” and related manuals to ensure proper use of this product. After reading  them, store them in a safe place for future reference. WARNING • The information in this manual is subject to change without no (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 2  Contents Caution  …………………………………………………………………………………… 3 1. Main functions  ……………………………………………………………………… 5 1.1 Live Mode  ………………………………………………………………………… 5 1.2 PC-LESS Presentation   ……… (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 3  Caution Caution [Restriction in terms of inserts or pulls memory card and wireless network card] Do not pull out the memory card and the wireless network card while the power is on.  The memory card can be pulled out only while the card access LED is off. Choose one of the following item either “REMOVE ALL”, “REMOVE SD CARD” or  “REMOVE USB” that matches a media to be taken out, from proj (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 4 4 Caution The manufacturer (Gemtek) hereby declare that this equipment (SD wireless  network card), model SD-Link11g is in compliance with the essential requirements  and other relevant provisions of Directive 1999/5/EC. 0560 ! (...)

CP-X2 - XGA LCD Projector Page 5 5 1. Main functions 1. Main functions 1.1 Live Mode (Project images from PC) The MIU (Multi Information processing Unit) enables “Wireless presentation” by  choosing Live Mode. The Live Mode give you an ability to display a same image that is shown on the  PC through the network by using an application program “MIU Live Viewer”.   (Fig.1.1.a) The “MIU Live Viewer” captures PC scre (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 6 6 1. Main functions The MIU enables “PC-LESS Presentation” by choosing PC-LESS function. (Fig. 1.2.a)  The PC-LESS function enables to display images that are stored in the SD Memory  Card or USB memory. The “PC-LESS Presentation” has 4 types of display modes. 1.2  PC-LESS Presentation   (Display the images stored in SD Memory Card/USB  (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 7  1. Main functions 1.2  PC-LESS Presentation   (Display the images stored in SD Memory Card/USB memory.) (Continued) Fig. 1.2.b Remote Control • There are several naming limitations for the folders and files. (1)  Alphanumeric and Japanese characters are supported if the language  setting is Japanese. (2)  Alphanumeric and Latin-1 characters are supported if the la (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 8 8 Followings are required for 1 projector and 1 PC connection. Multiple PC  connection is described in section 4.1. 2. Equipment connection and network setting 2. Equipment connection and network setting 2.1 Required equipment preparation Projector: 1 unit PC: 1 set  (“MIU Live Viewer” installation is required for “Live Mode” usage.)  IEEE802.11b/g wireless LAN equipment is required.  (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 9 9 2. Equipment connection and network setting  2.2  Network connection using “One-Click-Communication” function  (Continued) e Press the RESET button on remote control. Then Reset Menu will be displayed. r Press the ▲ button to reset the Network settings. /+7 4'5'6 %#0%'. • SSID, WEP Key will be set to factory default settings. • If you like to set these items, please set (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 10 10 2. Equipment connection and network setting 4)  Click  [One-Click] button in Fig. 2.2.a, then projector will be found. And the  capture start button   is activated, then real time display will be started  automatically.  2.2  Network connection using “One-Click-Communication” function  (Continued) [Wireless LAN connection]1)  When (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 11  2. Equipment connection and network setting This is the explanation of network connection settings for Windows XP and  Internet Explorer. 1) Log on to Windows XP as administrator authority. (*) 2) Open “Control Panel” from “Start” menu. 3) Open “Network and Internet Connections” in “Control Panel”. (Fig. 2.3.2.a) * Administrator authority is the account, which can access to all (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 12  2. Equipment connection and network setting 2.3 Manual network connection setting – Wired LAN - (Continued)5)  When more than 2 usable network devices exist, make only one device “Valid”  that you want to use and the rest of devices “Invalid”. (In this case, “Local Area  Connection” is selected.) 6)  Open “Local Area Connection Properties” window you use f (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 13  2. Equipment connection and network setting 2.3 Manual network connection setting – Wired LAN - (Continued)[About IP address]Network address of PC IP address should be common with projector’s one but the  PC total IP address should not be overlapped with other networked equipments. For example, projector initial settings are as follows. IP address: 192.168.1.10 Subnet mask: 255.255.25 (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 14 14 2.3 Manual network connection setting – Wired LAN - (Continued) 2. Equipment connection and network setting 1)  Click “Internet Options” in “Network and Internet Connections” window   (Fig. 2.3.3.a) to open “Internet Properties” window. (Fig. 2.3.3.b) 2.3.3 “Internet Option” setting Fig. 2.3.3.a “Network and Internet Connections” window Click Fig. 2.3.3.b “Internet Prop (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 15 15 2. Equipment connection and network setting 2.3 Manual network connection setting – Wired LAN - (Continued) Fig. 2.3.3.c “Local Area Network (LAN) Settings” window 3)  Uncheck all boxes in “Local Area Network (LAN) Settings” window. (Fig. 2.3.3.c) Check PC and projector are connected properly here. If it is not connected, check  (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 16 16 2. Equipment connection and network setting By installing SD-Link11g card, PC and projector are able to communicate in both  Ad-Hoc and Infrastructure modes. How to set up wireless LAN connection manually. 2.4  Manual network connection setting – Wireless LAN 2.4.1 Preparation for wireless LAN connection Fig. 2.4.1.a Without access point communication (Ad-Hoc) Fig. 2.4.1.b With access point commu (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 17  2. Equipment connection and network setting 2.4  Manual network connection setting – Wireless LAN (Continued) Using wireless LAN utility for Windows XP standard. Wireless LAN initial settings for the projector is as follows. Connection Control  : Ad-Hoc SSID  : wireless Channel  : 1ch Encryption rating  : None Communication speed : AUTO IP address  (...)

CP-X2 - XGA LCD Projector Page 18 18 2. Equipment connection and network setting 2.4  Manual network connection setting – Wireless LAN (Continued)4)  Set used protocol as “TCP/IP” and open TCP/IP property. Set IP address and  other settings as same as wired LAN connection set up. (12) 5)  Open “Wireless Networks” tab. (Fig. 2.4.2.c) Fig. 2.4.2.c “Wireless Network Connection Properties� (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 19 19 2. Equipment connection and network setting 2.4  Manual network connection setting – Wireless LAN (Continued)8)  Set each item as follows.  Network name (SSID): wireless  Data encryption: not enabled (Default setting is not enabled.) *  This explanation meets the projector default setting. If access point is used or  data encryption is used, if needs to change settin (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 20 20 When configuring or controlling the projector via a web browser, an ID and  password are required. There are two types of IDs, Administrator IDs and User  IDs. The following chart describes the differences between user and administrator  IDs. Below are the factory default settings for administrator IDs, user IDs and  passwords. Item Description Administrator ID User ID (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 21  2. Equipment connection and network setting Refer to the following for configuring or controlling the projector via a web browser. Example: If the IP address of the projector is set to 192.168.1.10: 1)  Enter  [http://192.168.1.10/] into the address  bar of the web browser and the scre (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 22  2. Equipment connection and network setting 2.5.1 Network Information All screen images displayed in this manual are  screens of a logon using an administrator ID. Any administrator only functions will not be  displayed when using a user ID. Refer to the  descriptions in each table. Displays the projector’s current network configuration settings. Item Description DHCP Displays the DHCP confi (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 23  2. Equipment connection and network setting 2.5.2 Network Settings Displays and configures network settings. Item Description Network Mode Select Network mode "Wired" or "Wireless". IP Configuration Configures network settings. DHCP ON Enables DHCP. DHCP OFF Disables DHCP. IP Address Configures the IP address when DHCP is disabled. Subnet Mask Configures the Subnet Ma (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 24 24 Click the  [Apply] button to save the settings. • The new configuration settings are activated after restarting the  network connection. When the configuration settings are changed, you must  restart the network connection. You can restart the network connection by  clicking  [Network Restart] on the main menu. • If you connect the projector to an existing network, (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 25 25 2. Equipment connection and network setting 2.5.3 Port Settings Displays and configures communication port settings. Click the  [Apply] button to save the settings. Item Description Network Control Port1  (Port:23) Configures command control port 1 (Port:23). Port open Click the  [Enable] check box to use port 23. Authentication Click the  [Enable] check box when authentication (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 26 26 2. Equipment connection and network setting 2.5.4 Mail Settings Displays and configures e-mail addressing settings. Click the  [Apply] button to save the settings. • You can confirm whether the mail settings work correctly using the  [Send Test Mail] button. Please enable Send mail setting before clicking [Send  Test Mail]. • If y (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 27  2. Equipment connection and network setting 2.5.5 Alert Settings Displays and configures failure & warning alerts. Alert Item Description Cover Error The lamp cover has not been properly fixed. Fan Error The cooling fan is not operating. Lamp Error The lamp does not light, and there is a possibility that interior  portion has become heated. Temp Error There is a possibility that the interior portion has (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 28 28 2. Equipment connection and network setting 2.5.5 Alert Settings (Continued) Setting Item Description Alarm Time Configures the time to alert. (Only Lamp Time Alarm and Filter Time Alarm.) SNMP Trap Click the  [Enable] check box to enable SNMP Trap alerts. Send Mail Click the  [Enable] check box to enable e-mail alerts. (Except Cold Start and Authenticat (...)

CP-X2 - XGA LCD Projector Page 29 29 2. Equipment connection and network setting 2.5.6 Schedule Settings Displays and configures schedule settings. Item Description Daily Configures the daily schedule. Sunday Configures the Sunday schedule. Monday Configures the Monday schedule. Tuesday Configures the Tuesday schedule. Wednesday Configures the Wednesday schedule. Thursday Configures the Thursday schedule. Friday Configures the Friday sched (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 30 30 2. Equipment connection and network setting 2.5.6 Schedule Setting (Continued) Item Daily & Weekly Description Schedule Click the  [Enable] check box to enable the scheduling. Schedule List Displays the current schedule. 2.5 Configuring and controlling the projector via a web browser (Continued) Item Description Time Configures the time to execute commands. Command [Parameter] Configures the command (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 31  2. Equipment connection and network setting 2.5.7 Date/Time Settings Displays and configures the date and time settings. Item Description Current Date Configures the current date in year/month/day format. Current Time Configures the current time in hour:minute:second format. Daylight Savings Time Click the  [ON] check box to enable daylight savings time and  set the following items. 2.5 Configuring (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 32  2. Equipment connection and network setting 2.5.7 Date/Time Settings (Continued) Click the  [Apply] button to save the settings. Item Description Time difference Configures the time difference. Set the same time difference  as the one set on your PC. If unsure, consult your IT  manager. SNTP Click the  [ON] check box to retrieve Date and Time  information from the (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 33  2. Equipment connection and network setting 2.5.8 Security Settings Item Description Administrator authority Configures the Administrator ID and Password. Administrator ID Configures the Administrator ID. The length of the text can be up to 32 alphanumeric  characters. Administrator  Password Configures the Administrator Password. The length of the text can be up to 255 alphanumeric  (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 34 34 2. Equipment connection and network setting Click the  [Apply] button to save the settings. Authentication  Password Configures the Authentication Password. The length of the text can be up to 32 alphanumeric  characters. Re-enter Authentication  Password Used to re-enter the above password for verification. SNMP Configures the community name if SNMP is used. Community name (...)

CP-X2 - XGA LCD Projector Page 35 35 2. Equipment connection and network setting 2.5.9 Projector Control The items shown in the table below can be  performed using the  [Projector Control] menu. Select an item using the up and down arrow keys  on the PC. Most of the items have a submenu. Refer to the table below for details. Controls the projector. Item Description Main Power Turns the power On/Off. Input Source Selects the input (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 36 36 2. Equipment connection and network setting 2.5.9 Projector Control (Continued) Item Description Image Aspect Selects the Aspect setting. Over Scan Adjusts the Over Scan setting. V Position Adjusts the V Position. H Position Adjusts the H Position. H Phase Adjusts the H Phase. H Size Adjusts the H Size. Auto Adjust Execute Performs Auto Adjustment. Input Progressive Selects the progressiv (...)

CP-X2 - XGA LCD Projector Page 37  2. Equipment connection and network setting Option Language Selects the Language for the OSD. Menu Position V Adjusts the vertical Menu Position. Menu Position H Adjusts the horizontal Menu Position. Blank Selects the Blank mode. Startup Selects the Startup screen mode. MyScreen Lock Turns MyScreen lock function On/Off. Message Turns the Message function On/Off. Auto Search Turns the Automatic signal search (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 38 38 2. Equipment connection and network setting 2.5.11 Network Restart Restarts the projector’s network connection. Item Description Restart Restarts the projector’s network connection in order to  activate new configuration settings. • Restarting requires you to re-log on in order to further control or configure the  projector via a web browser. Wait 10 seconds or more after clicking  [Rest (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 39 39 Open browser when it is possible to communicate with projector. Corresponding  browser is Internet Explorer 5.5 or later. Specify http://(projector IP address)/ to start. For example, http://192.168.1.10/ (Input this URL when IP address is not changed.) After start up, enter your ID and password, and click  [Logon]. Following window  appears as shown in Fig. 2.6.a. (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 40 40 2.6 Utilize Web Remote Control (Continued) Click “Remote Control” in this window to display Web Remote Control as shown in  Fig.2.6.b. The same operation is assigned  to the bundled remote control. The arrow keys ▲/▼/◄/►on the  remote control are shown as  [UP]  / [DOWN]/[LEFT]/[RIGHT] buttons  on the web remote. Each mode will be activated by  clicking these bu (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 41 41 3. How to use Projector software – Basics - This section explains how to use the “MIU Live Viewer”. 3.1 How to use “MIU Live Viewer” 3.1.1 Install “MIU Live Viewer”In order to use the projector with a PC for Live Mode, you will first need to install  the accompanying software on all the PCs you will be using.   • OS:   Windows 2000 Professional Service Pack4,    Windo (...)

CP-X2 - XGA LCD Projector Page 42 42 3. How to use Projector software – Basics - 3.1.2 Software Installation Procedure1) Turn on the PC. 2) Shut down all applications. 3)  Insert the accompanying CD-ROM into the  PC's CD-ROM drive. 4)  After a moment, the Welcome to MIU Utilities  Setup dialog will appear as shown on the right.  Press  [Next]. If the Wel (...)

CP-X2 - XGA LCD Projector Page 43 43 3.1 How to use “MIU Live Viewer” (Continued) Fig. 3.1.3.a “MIU Live Viewer” Window 3.1.3 Explanation of “MIU Live Viewer”Double click “MIU_LiveViewer.exe” to start up. Fig. 3.1.3.a appears on your  screen. w r qe s y u t a o i 3. How to use Projector software – Basics - 8)  The Hardware Installation dialog appears.  Press Continue Anyway. 9)  After a momen (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 44 44 3. How to use Projector software – Basics - [“MIU Live Viewer” window: Fig. 3.1.3.a]1)  “File” menu  Display file menu. 2)  “Help” menu  Display “MIU Live Viewer” information. 3)  Stop button  Stop real time display. 4)  Capture start button  Start real time display.  5)  Minimize button  Close “MIU Live Viewer” (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 45 45 3. How to use Projector software – Basics - 3.1 How to use “MIU Live Viewer” (Continued) 1)  CPU Share  Set up any capturing performance on the PC screen by using control bar. Low (At the far left): Set this position when many CPU resources are required  by applications other than “MIU Live Viewer”. This setting is not  good for displaying frequently cha (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 46 46 3. How to use Projector software – Basics - 3.1 How to use “MIU Live Viewer” (Continued)[Icon in task tray]To display “MIU Live Viewer” icon in task tray, click Minimize button in “MIU Live  Viewer” window. The icon with yellow thunder mark shows that communication is  connected, and it with red cross mark shows that it is disconnected. (Fig. 3.1.3.d  shows while communication is (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 47 47 3. How to use Projector software – Basics - This section explains basic of how to use “MIU Live Viewer” functions. • Before start up the “MIU Live Viewer”, you have to set the projector into LIVE  MODE by either of following way. 1) from Web Remote Control     (1) Click  [LIVE MODE] button. 2)  from OSD Menu     (1)  Open the OSD me (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 48 48 3. How to use Projector software – Basics - 2)  Start Web Remote Control (39), and click  [LIVE MODE] button on Web  Remote Control to change projector mode to “MIU Live Viewer”. After changing,  screen of the output monitor connected with projector turn all blue. 3) Perform following operations on “MIU Live Viewer” (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 49 49 3. How to use Projector software – Basics - (3) Click Capture start button. 3.1 How to use “MIU Live Viewer” (Continued) Fig. 3.1.4.d Start capturing Based on the above operation, if captured picture of PC screen is displayed real  time on monitor connected with projector, it is succeeded. Much easier to connect  if you utilize “One-Click-Communication” function. (8) This is basic usage. Re (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 50 50 3. How to use Projector software – Basics - 4)  Select THUMBNAIL on PC-LESS PRESENTATION Menu. And press the  ENTER button on remote control or ► button on Keypad. Then thumbnail  appears. Fig. 3.2.a Thumbnail Mode If thumbnail appears by above operation, it is succeeded. (Fig.3.2.a) This is basic  usage. There are varieties of usage for “PC-LESS P (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 51 51 3.2 Utilize “PC-LESS Presentation” –Basic - (Continued) 3. How to use Projector software – Basics - You can also activate “PC-LESS Presentation” from the Web Remote Control. 1)  Save JPEG picture files into root directory in SD Memory Card or USB memory.  Insert SD Memory Card into SD card slot on projector or insert USB m (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 52 52 4. Utilize projector – Advanced - 4. Utilize projector – Advanced - This section explains how to connect multiple PCs. 4.1 Utilize “MIU Live Viewer” – Advanced - 4.1.1  Connect multiple PCs with one projector (Multiple PCs  connection) A projector can be connected with up to 4 PCs to display multiple windows. Fig. 4.1.1.a Multiple PCs connection outline Followings are required f (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 53 53 4. Utilize projector – Advanced - 4.1 Utilize “MIU Live Viewer” – Advanced - (Continued)[Connection]1)  Connect all PCs and projector using LAN cables and hub as shown in Fig.  4.1.1.a. 2)  Start up “MIU Live Viewer” in each PC. Check the IP address in PCs and  confirm xxx of [192.168.1.xxx] in IP address is set different value in each PC. 3)  Cli (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 54 54 “PC-LESS Presentation” reads image data from memory cards inserted into SD  CARD slot or USB STORAGE port and perform followings.  SD Memory and SD wireless network card can not be inserted at the same time. - Thumbnail Mode (55) - Full Screen Mode (57) - Slide Show Mode (59) - Directory Tree View (61) 4.2 Utilize “PC-LESS Presentation” – Advanced - Fig. 4.2.a Thumbn (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 55 55 6*7/$0#+.=5&? +OCIG ;'5 '06'4 5.+&'5*19 2%.'5524'5'06#6+10/'07 +06'48#.U 5612 /1&'10'6+/' 2.#; 56#46 +OCIG +OCIG +OCIG +OCIG +OCIG +OCIG +OCIG +OCIG +OCIG +OCIG +OCIG 㪈 㪉 㪊 㪌 㪍 㪋 㪏 㪐 㪎 㪈㪈 㪈㪉 㪈㪇 Following picture and movie files can be displayed. • JPEG (.jpeg, .jpg) * Progre (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 56 56 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) Following operations can be accessible while thumbnail is displayed. * These operations are not accessible while projector OSD menu is displayed. • Thumbnail Mode shows 12 pictures in 1 page as maximum. • It is not possible to change the input port by INPUT button w (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 57 57 4.2.2 Full Screen ModeFull Screen Mode (Fig.4.2.2) shows a full display image. To make full screen  display, press the ENTER button on remote control or the INPUT button on  Keypad or click  [ENTER] button in the Web Remote Control if the image file is  selected on Thumbnail Mode or Directory Tree View. Fig.4.2.2 Full Screen Mode 4.2 Utilize “PC-LESS Presentation” (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 58 58 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)You can display the image file with your desired size. 1) Select the DISPLAY SIZE in PC-LESS PRESENTATION Menu. 2)  Press the ENTER button on the remote   control or ► button on the Keypad. 3) Then DISPLAY SIZE menu appears. 4) Select your desired DISPLAY SIZE. • REAL :  Displays the im (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 59 59 4.2.3 Slide Show Mode Fig. 4.2.3 Slide Show Mode 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) Following operations can be accessible while Slide show is displayed. * These operations are not accessible while projector OSD menu is displayed. • It is impossible to change the input port by INPUT button if  THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed. • Display t (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 60 60 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)You can play the Slide show at your desired configuration.  Configure the SLIDE SHOW items in THUMBNAIL. 1) START #   : Set the beginning number of Slide show. 2) STOP #   : Set the end number of Slide show. 3) INTERVAL   : Set the interval Slide show. 4) MODE   :   (...)

CP-X2 - XGA LCD Projector Page 61 61 4.2.4 Directory Tree ViewYou can display the directory with the projector Menu.  Select DIRECTORY on PC-LESS PRESENTATION Menu.  And press the ENTER / ►  button on remote control or ►  button on Keypad. Then directory will be displayed. You can also display the directory by clicking the  [DIRECTORY] button in the Web Remote Control. Directory Tr (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 62 62 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued)Following operations can be accessible while directory is displayed. * These operations are not accessible while projector OSD menu is displayed. • It is not possible to change the input port by INPUT button when  THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed. • Display the projector OSD Menu before changing the input (...)

CP-X2 - XGA LCD Projector Page 63 63 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) [File information display] File information display shows following information. Picture file (still picture) - File format (“JPEG Image”, “PNG Image” or “BMP Image”) - Time stamp (When file is created) - File size (Size of File) - Image size (File resolution) Movie file (motion picture) - File format (“MP4 Movie� (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 64 64 4.2.5 “PC-LESS Presentation” error messageError message is displayed at a specific condition while “PC-LESS Presentation”  mode. It appears at the bottom and the gray area of screen. Fig. 4.2.5 “PC-LESS Presentation” error message 4.2 Utilize “PC-LESS Presentation” – Advanced - (Continued) “PC-LESS Presentation” error message list Error message Error content Display mode File is no (...)

CP-X2 - XGA LCD Projector Page 65 65 Playlist is a DOS format text file, which decides the order of displayed still image  files or moving image files in the thumbnail or the slide show. Playlist file name is  [imagelistdir.txt]. It is created in each folder when “PC- LESS Presentation” is displayed. The timing of playlist creation is when “PC-LESS  Presentation” is displa (...)

CP-X2 - XGA LCD Projector Page 66 66 4. Utilize projector – Advanced - The projector can send an alert message to the specified e-mail addresses when  the projector detects a certain condition that is requiring maintenance or detected  an error. • Up to five e-mail addresses can be specified. • The projector may be not able to send e-mail if the projector suddenly loses  power. NOTE Mail Settings (26)To use the proj (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 67 67 4. Utilize projector – Advanced -  8)  Click  [Alert Settings] on the main menu to configure the E-mail Alerts settings.  9)  Select and configure each alert item. Refer to “Alert Settings” in “Configuring  and controlling the Projector via a Web Browser” for further information. 10) Click the  (...)

CP-X2 - XGA LCD Projector Page 68 68 The SNMP (Simple Network Management Protocol) enables to manage the  projector information, which is a failure or warning status, from the computer on  the network. The SNMP management software will be required on the computer  to use this function. • It is recommended that SNMP functions be carried out by a network  administrator.  • SNMP management software (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 69 69 The scheduling function enables to setup scheduled events including power on /  power off. It enables to be “self-management” projector. • You can schedule the following control events: Power ON/OFF, Input  Source and Transferred Image Display.  • The power on / off event has the lowest priority among the all events that are  defined at the same time.  • Ther (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 70 70 Schedule Settings (29)Schedule settings can be configured from a web browser. Example: If the IP address of the projector is set to 192.168.1.10: There are three types of scheduling.  1) Daily: Perform the specified operation at a specified time every day.  2)  Sunday ~ Saturday: Perform the specified operation at the specified time on a  specified day of the week.  3) S (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 71  Date/Time Settings (31)The Date/Time setting can be adjusted via a web browser. Example: If the IP address of the projector is set to 192.168.1.10/: • The battery for the built in clock may be dead if the clock loses time  even when the Date and Time have been set correctly. Replace the battery by  following the instructions on replacing the battery. (Internal clock battery&# (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 72  The projector can display a still image in an SD Memory Card or USB memory  that is transferred via the network. (Fig.4.7) e-SHOT transmission requires an exclusive application for your PC. You can  download it from the Hitachi web site (http://hitachi.us/digitalmedia or http://www. hitachidigitalmedia.com). Refer to the manual for the application for instructions. 4. Utilize project (...)

Hitachi CP-X2 - XGA LCD Projector Manual Page 73  You can configure and control the projector via the network using commands. Communication PortThe following two ports are assigned for the command control.      TCP #23      TCP #9715 Command Control Settings (25)Configure the following items from a web browser when command control is used. Example: If the IP address of the projector is set to 192.168.1.10:1) E (...)

Hitachi CP-X2 - XGA LCD Projector Operation & user’s manual Page 74 74 Command Control Settings (Continued)When the authentication setting is enabled, the following settings are required. (33) 7) Click  [Security Settings] on the main menu.  8)  Click  [Network Control] and enter the desired authentication password. * See  NOTE.  9) Click the  [Apply] button to save the settings. 4. Utilize projector – Advanced - 4.8 C (...)

CP-X2 - XGA LCD Projector Page 75 75 5. Troubleshooting 5. Troubleshooting Problem Likely Cause Things to Check Reference  Page  Number No image The projector is not turned  on. Is the projector's lamp on? *14 The projector's input source  isn't switched to MIU. Is the projector switched to  MIU? *15 Wireless / Wired Live Mode The projector  that you want  to connect to  is nowhere  to be found  (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 76 76 5. Troubleshooting Problem Likely Cause Things to Check Reference  Page  Number Wireless / Wired Live Mode Lots of  interference in  the images “Optimize Performance”  is set to “Transmission  speed”. Try setting “Optimize  Performance” to “Image  quality”. 45 Two cursors  appear Cursor of the PC and  cursor of the projector  are displayed com (...)

Hitachi CP-X2 - XGA LCD Projector Projector Manual Page 77  6. Specifications 6. Specifications Item Specifications File format JPEG: Progressive is not corresponded. Bitmap: 16bit mode and compressed bitmap is not corresponded. PNG: Interlace PNG is not corresponded. MPEG4:  Supported bit resolution rate is less than 1Mbps in Simple  Profile.   Supported resolution is less than VGA.   Supported Audio format is only AAC. Contro (...)

CP-X2 - XGA LCD Projector Page 78 78 7. Warranty and After-sales service 7. Warranty and After-sales service If a problem occurs with the equipment, please read “5. Troubleshooting” (75)  section first and review all suggested check points. After that, please contact your  dealer or service company, if you still have the problem. They will tell you what  warranty condition is applied. (...)