Mitsubishi UD8400U User Manual

Mitsubishi DLP UD8400U Manual LAN Control Utility User Manual (for UD8400U) Contents 1. Introduction ............................................................................................................ 2 1.1. Preparing to use network features .......................................................................................... 2 1.2. Functions and features ............................................................................................. (...)

DLP UD8400U EN-2 1.1. Preparing to use network features This projector is equipped with the network function to control and monitor the projector’s operations and to send e-mail notification. Before using the network function, perform the following three preparation steps. • InstallingtheProjectorViewGlobal+ • AssigningtheprojectorIPaddress • ConguringsettingssuchasPASSWORD,E-mailSetti (...)

Mitsubishi DLP UD8400U Manual EN-3 Microsoft ® and Windows ® are the registered trademark or trademark of Microsoft Corporation in the United States and other countries. (The official name of Windows is Microsoft Windows Operating System.) Pentium is the trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Other company names and product names described in this document are the registered tradema (...)

DLP UD8400U EN-4 2.1. Installation of “ProjectorView Global+” Beforestartinginstallation,besuretoread“ReadMe.txt”containedintheCD-ROM. Copy ProjectorView Global+v3_1.msi contained in the Tools folder of CD-ROM to the hard disk of your personal computer. (1) Double click “ProjectorView Global+v3_1.msi”, and start up the installer of “ProjectorView Global+”. (2) The setup window is displayed. Cli (...)

DLP UD8400U EN-5 (5) When the installation has been completed, click [Close]. 2.2. When deleting “ProjectorView Global+” (Uninstallation) <Note> • Whenuninstalling“ProjectorViewGlobal+”,“ProjectorViewGlobal+”shouldbeendedinadvance.Ifthe application continues operating, uninstallation can not be performed normally. (1) Double click “ProjectorView Global+v3_1.msi”, and start up the in (...)

Mitsubishi DLP UD8400U Operation & user’s manual EN-6  Menu bar Configuration Youcanspecifythefollowingsettings: AddNewGroup: Youcancreateanewgroup. EditScheduleSetting: Youcaneditschedulesettingssetforexistinggroups. Search Projector: Automatically searches available projectors. AssignIP: YoucancongureIPsettingsoftheprojector. EditProjectorSetting: Youcanedit (...)

DLP UD8400U EN-7 3. Main screen  Group Name Group of the projector can be selected. When you select “All”, all the registered projectors are displayed. Newly created group(s) are added to the list. When you select your choice of group, all projectors that belong to the selected group are displayed.  Status tag Property and status of the projector can be indicated. When clicking each tag button (excepttheMACaddress),th (...)

Mitsubishi DLP UD8400U Operation & user’s manual EN-8 3. Main screen 3.1. System settings (1) Select “System Configuration” from “Configuration” of the menu bar on the main screen. • “SystemConguration”windowisdisplayed.(Defaultsettingsareshowninthefollowingexample.) Item Description Language Youcanselecttheuserinterfacelanguage,JapaneseorEnglish. RefreshStatusCycle Youcansetth (...)

Mitsubishi DLP UD8400U Manual EN-9 4. Projector registration 4.1. Connection Connect the controller PC and the projector, which have installed “ProjectorView Global+”, to a commercially available LAN cable. When connecting multiple projectors, use a commercially available hub. • ALANterminalisrequiredforthecontrollerPC. • UseaLANcablecompatiblewithCategory5and100BASE-T.  UseacrossoverLAN (...)

Mitsubishi DLP UD8400U Projector Manual EN-10 4. Projector registration 4.2. Registration of projector to “ProjectorView Global+ Theprocedurestoregisterprojectorsvaryamongtheforegoingconnectionexamples. • Inconnectionexamples1and2(whereprojectorsareinstalledwithinthesamelocalnetwork),theprojectors within such network are automatically detected and registered. For details, see procedure A (...)

DLP UD8400U EN-11 4. Projector registration Procedure B - Connection example 3 (where projectors are installed via a router) To automatically detect projectors connected via a router, confirm the IP address in the projector network menu and specify a range of IP addresses to search that particular IP address using “Search Projector Setting”. <Note> If you want to connect a projector via a router after automatically detecting it, you ne (...)

Mitsubishi DLP UD8400U Operation & user’s manual EN-12 4. Projector registration <Note> • SetthedefaultgatewaysoftheprojectorsandPCcorrectly.Fordetails,contactyournetworkadministrator. • BesuretomakeanoteoftheIPaddressesanddefaultgatewaysyouset.Ifyouforgetthesettingvalues,you may not be able to detect the projectors again. • Atinitialsetup,DHCP� (...)

Mitsubishi DLP UD8400U Manual EN-13 4. Projector registration 4.4. When changing projector settings (1) Select the projector which you like to change from the projector list on the main screen. (2) Select “Edit Projector Setting” from “Configuration” of the menu bar. • “EditProjectorSetting”windowisdisplayed. (3) Set the Projector Name and its group and the theft detector. Item Description Projector Name Input the projector name (...)

DLP UD8400U EN-14 5. Operation of projector 5.1. Operation of projector by remote controller Group or single unit of projector can be operated. (1) Select the projector which you like to operate from the projector list on the main screen. • Whenselectingmorethanoneprojectorsimultaneously,selectwhilepressingtheCtrlkey. (2) Click [Remote Controller] of the tool bar on the main screen or when you like to oper (...)

Mitsubishi DLP UD8400U Projector Manual EN-15 5. Operation of projector 5.2. Confirmation of projector status The status of the projector is displayed on the projector list on the main screen. Item Description Check Theftdetectorsetting(ON/OFF) No. Projector list registration number Projector Name Projector name set in the application MAC Address MAC address of the projector IP Address IP address of the projector Power Powersupplystatusofthe (...)

DLP UD8400U EN-16 6. Schedule setting 6.1. Creation of projector group Multiple projectors can be controlled and batched by sorting groups. Also,eachgroupcanseteachtimeofthepowersupplyON/OFFeveryday. SincethescheduleofthepowersupplyON/OFFisperformedbyeachgroup,theprojectorwhichyoulike tooperate at the same schedule should be integrated into the same group (...)

Mitsubishi DLP UD8400U Manual EN-17 6. Schedule setting <Note> • ThepowersupplyONandthepowersupplyOFFcannotbeselectedatthesametimeofthesamedayofthe week. • TheScheduleSettingwillbeexecutedwhile“ProjectorViewGlobal+”isinoperation. • Dependingonusageconditions,suchaswhentherearesomanyprojectorsthatyou (...)

Mitsubishi DLP UD8400U Projector Manual EN-18 6. Schedule setting 6.3. When deleting group (1) Select the group which you like to delete from the Group select pull-down menu on the main screen. (2) Select “Edit Schedule Setting” from “Configuration” of the menu bar. • “EditScheduleSetting”windowisdisplayed. (3) Click [Delete]. • Theselectedgroupisdeleted. <Note> • Whendeletingagroup,theprojector (...)

Mitsubishi DLP UD8400U Projector Manual EN-19 7. E-mail setting When the communication with the projector monitored by the theft detector is disrupted, a warning E-mail can be sent to the designated address, enabling to serve for early detection of the projector theft. The E-mail setting can not be set at every projector and every group. The same setting should be set for all projectors. 7.1. Connection with E-mail server Connect the E-mail server to the network to which (...)

Mitsubishi DLP UD8400U Operation & user’s manual EN-20 8. ProjectorView ProjectorView is a web-browser based remote control and monitoring tool for network projectors. If you use the projectors listed in page 29, see ProjectorView in “LAN Control Utility” User Manual included with the projector. <Note> • WhenCRESTRONisselectedwiththenetworkmenu,itbecomestheWebcontrolforCRESTRON. 8.1. Main functions • Itdisplaysthe� (...)

DLP UD8400U EN-21 8. ProjectorView <Note> • Iflampmodeissetto“STANDARD”,“Lamptime”displayedmaybelongerthan“Operationtime”.  ProjectorView main window (REMOTE CONTROL) WhenyouclickREMOTECONTROL,theRemoteControlwindowisdisplayed.Youcanclickthebuttons displayedinthewindowtoremotelycontroltheprojector.Butto (...)

DLP UD8400U EN-22 8. ProjectorView E-mail notification feature When there is something wrong with the projector, an E-mail notification is automatically sent to the designated address to post an alert or error message. To use this feature, enter the SMTP IP address, E-mail address, and E-mail from in the Setup window. (For details, see “8.3. Entering projector information”.) Once you have configured the above settings, the E-mail notifica (...)

Mitsubishi DLP UD8400U Operation & user’s manual EN-23 8. ProjectorView 8.3. Entering projector information (1) Click [SETUP] in the ProjectorView main window (PROJECTOR INFORMATION). • Setupwindowisdisplayed. <Note> • BesuretoenterdatawithinveminutesaftertheSetupwindowisdisplayed.ClickOKtosavechanges. The connection will turn off in five minutes after the window is displayed so you need to go ba (...)

DLP UD8400U EN-24 8. ProjectorView 8.4. Setting the network password (1) Click [PASSWORD] in the Setup window. • Thewindowappearstoenterthecurrentnetworkpassword. (2) Enter the current network password and click [OK]. (The default is "admin".) • Ifthepasswordiscorrect,anotherwindowappearstoenteranewone. • Ifthepasswordiswrong,anerrormessage� (...)

DLP UD8400U EN-25 9. Visual PA2 (Visual PA2 enabled projectors only) Visual PA2 is a feature to display messages on the projector screen. It can be used for all active Visual PA2 enabled projectors. Additionally,theprojectoriscapableofreadingaloudon-screenmessagesusingtheTextSpeechfunction.Note that some projectors may not have this function. See your projector User Manual for more information. <N (...)

Mitsubishi DLP UD8400U Operation & user’s manual EN-26 9. Visual PA2 (Visual PA2 enabled projectors only) 9.2. Saving messages entered and settings specified in Visual PA2 YoucansavemessagesenteredinTextbox,aswellassettingsspeciedforText,Frame,Location,andText Speech. These must be saved before you activate the Schedule function in the Visual PA2 window. (1) Enter text in Textbox, specify settings for Text, Frame, Location, a (...)

Mitsubishi DLP UD8400U Manual EN-27 9. Visual PA2 (Visual PA2 enabled projectors only) 9.5. Configuring the Schedule function of Visual PA2 By using the Visual PA2’s Schedule function, your intended messages can be displayed on the screen at a set time. (1) Click [Edit] in the Schedule area. • "VisualPA2Schedule"windowisdisplayed.(Thewindowbelowshowstheexamplewhentheschedules have been entered in thre (...)

Mitsubishi DLP UD8400U Operation & user’s manual EN-28 10. Telnet setup (Telnet enabled projectors only) YoucansetthepasswordforProjectorView,aweb-basedremotecontrolandmonitoringtoolfornetwork projectors, and the industry standard protocol PJLink based remote projector management tool, the display language on the ProjectorView, the LAN controlled mode, and the PJLink certification mode by running Telnet on the projector screen. Telnet (...)

Mitsubishi DLP UD8400U Operation & user’s manual EN-29 11. Others 11.1. Troubleshooting • Theprojectorcannotberecognized. The projector may not be recognized automatically due to the setting of fire wall. In such case, the communicationof“ProjectorViewGlobal+”shouldberegisteredasanexceptiontotherewall.Forthe setting of the fire wall, see the manual of the software that configures the fire wall. • Oper (...)