Mitsubishi HC3800 Supplementary Manual

Mitsubishi Projector HC3800 Control manual Free PDF Download on Guides-Base.com

Mitsubishi HC3800 Projector PDF Control manual

  • Model: HC3800
  • Brand: Mitsubishi
  • Type: Control manual
  • Category: Projector
  • File Size:
  • No. of pages: 6
Download Mitsubishi HC3800 PDF Manual

Also for Mitsubishi HC3800:

Mitsubishi HC3800 Summary of Contents:

Page view Summary of Page's Content
1 Page 1 of Mitsubishi HC3800 Control manual

Mitsubishi HC3800 Control manual 1 DLP Projector HC3800 Controlling the projector using a personal computer This projector can be controlled by connecting a personal computer with RS-232C terminal. PC-controllable functions: • Turning the power ON or OFF • Changing input signals • Inputting commands by pressing the buttons on the control panel and remote control • Menu setting Connection Important: • Make sure that your computer and projector are turned of (...)

2 Page 2 of Mitsubishi HC3800 Control manual

Mitsubishi HC3800 Projector Manual 2 3) Control sequence (1) Send the command from the personal computer to the projector. (2) The projector will send a return command after it receives an end code. If the command is not received correctly, the projector will not send the return command. (3) The personal computer checks the command and confirms if the sent command has been executed or not. (4) This projector sends various codes other than the return code. When having a c (...)

3 Page 3 of Mitsubishi HC3800 Control manual

Mitsubishi HC3800 Projector Manual 3 6) Remote commands (Not executable in stand-by mode. When the remote commands are sent while the splash screen is being displayed, the splash screen is only canceled.) Some remote control operations can be achieved by the remote command codes. The remote commands have no data codes. [Example] When displaying the MENU selection bar. (Figures and symbols enclosed in quotation marks are ASCII codes.): 7) Password lock commands The passw (...)

4 Page 4 of Mitsubishi HC3800 Control manual

Mitsubishi HC3800 Projector Manual 4 8) Reading command diagram The projectors operating status, such as POWER-ON/OFF and the currently selected input terminal, etc. can be monitored. The PC sends the command without attaching the data code to it. On the other hand, the projector attaches to the received command its current operating status as the data code and send it back to the PC. [Example] When checking the currently selected input terminal (when the INPUT VIDEO is (...)

5 Page 5 of Mitsubishi HC3800 Control manual

HC3800 5 *1) Setting range differs depending on the input signals. • Some commands are not executed depending on the input signal. The operational restrictions same as those on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details. How to set the value Use the ASCII or HEX code as shown below to set the value. KEYSTONE (Vertical) KS 4Bh 53h ±15 LAMP MODE LM 4Ch 4Dh 0 (STANDARD), 1 (LOW) AUTO POWER O (...)

6 Page 6 of Mitsubishi HC3800 Control manual

Mitsubishi HC3800 Control manual 6 [Example 1] When setting the AUTO POWER ON to ON. (Figures and symbols enclosed in quotation marks are ASCII codes.): [Example 2] When setting the CONTRAST R of the COLOR TEMP.-USER to +10, the CONTRAST G to 0, and the CONTRAST B to -5. (Figures and symbols enclosed in quotation marks are ASCII codes.): [Example 3] When checking the TINT setting (when the TINT is set to +10). (Figures and symbols enclosed in quo- tation marks are AS (...)

Related Devices for Mitsubishi HC3800