NEC NP-M311W Manual

NEC Desktop, Projector NP-M311W Command manual Free PDF Download on Guides-Base.com

NEC NP-M311W Desktop, Projector PDF Command manual

  • Model: NP-M311W
  • Brand: NEC
  • Type: Command manual
  • Category: Desktop, Projector
  • File Size:
  • No. of pages: 56
Download NEC NP-M311W PDF Manual

Also for NEC NP-M311W:

NEC NP-M311W Summary of Contents:

Page view Summary of Page's Content
1 Page 1 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual ====================================================================== Control Commands for NEC Projector (Basic) Rev 4.28.11a Copyright (C) NEC Display Solutions, Ltd. 2002-2011 ---------------------------------------------------------------------- Updated on April 28, 2011 ---------------------------------------------------------------------- This file contains information about NEC projector control commands. Mod (...)

2 Page 2 of NEC NP-M311W Command manual

NP-M311W ====================================================================== Contents 1. Projector Control 2. Connection Method 3. Interface Conditions 4. List of Commands 5. Command Descriptions 6. Table of Response Error Codes ====================================================================== 1. Projector Control ---------------------------------------------------------------------- NEC projectors make use (...)

3 Page 3 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual [P350X/P350W/P420X Series] STANDBY MODE: "POWER-SAVING" Control Comm and Serial port Wired LAN port Wireless LAN unit POWER ON Yes No No Yes: Supported No: Not supported ==================================================================== 3. Interface Conditions ---------------------------------------------------------------------- Serial connection --------------------------------------------------------------- (...)

4 Page 4 of NEC NP-M311W Command manual

NP-M311W (1) (2) (3-1) (3-2) (3-3) (3-4) GT5000/GT6000 Yes Yes Yes Yes Yes No GT1150/GT2150 Yes No Yes Yes Yes No HT410/HT510 Yes No No No No No HT1000/HT1100 Yes No No No No No LT180 Yes No No No No No LT25/LT30/LT35 Yes No No No No No LT220/LT240/LT260 Yes No Yes Yes No No LT240K/LT260K Yes Yes Yes Yes No No LT245/LT265/LT280/LT380 Yes No No Yes Yes No MT860/MT1060/MT1065/MT1075 Yes Yes Yes Yes No No NP40/NP50/NP60 YesNoNoNoNoNo NP41/NP61/NP62 (...)

5 Page 5 of NEC NP-M311W Command manual

NEC NP-M311W Manual [ HT/LT/NP40/VT70/VT80/VT90/WT ] The PC CONTROL connector is a mini DIN 8-pin connector. 1 To TxD of PC 2 3 4 To GND of PC 5 6 7 To RxD of PC 8 * 2, 3, 5, 6, and 8 are used inside the projector. [ GT/LT80/MT/NP1000/VT (except VT70/VT80/VT90)/NP3150/NP905/NP600/NP4000/NP3250/NP610/NP2200/NP216/M300/P420/U300/V300 ] The PC CONTROL connector is a D-SUB 9-pin connector. 1 (...)

6 Page 6 of NEC NP-M311W Command manual

NEC NP-M311W Manual +-----+-----+-----+-------+-----+-----+-- --+-------+--------+ | 1 | 2 | 3 | 4 | 5 | 6 | ~ | n | m | +-----+-----+-----+---+---+-----+-----+-- --+-------+--------+ | 8 | 8 | 8 | 4 | 12 | 8 | ~ | 8 | 8 | | Bit | Bit | Bit |Bit| Bit | Bit | ~ | Bit | Bit | +-----+-----+-----+---+---------+-----+-- ~ --+-------+--------+ | | | | | | (...)

7 Page 7 of NEC NP-M311W Command manual

NP-M311W CAUTION : To notify individually, specifying a model code from the following model codes is required. * Model code: (4 Bit) This is a model code for the projector that sends and receives frames. Command : This specifies a model code for the projector that sends commands. (individual notification) Entering 0000B or 1111B becomes a common command for all the projectors. (broadcast notification) This is convenient (...)

8 Page 8 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual * Data portion This becomes data of data length specified in the data length portion. Command : This sets data added to a command to send it. ( See each command description.) Response : This sets data added to a response to send it. ( See each command description.) * Checksum This is lower ranking 8 bits of the sum total of the header and data portions of one transmit and receive data frame. 4-2. Data (...)

9 Page 9 of NEC NP-M311W Command manual

NEC NP-M311W Manual 01H : External control working 02H : Operating memory 03H : Standby 04H : On Forced on-screen mute mode 05H : Link mode working 06H : Displaying a signal other than PC Viewer 07H : -No signal- 08H : Displaying a test pattern or PC Card Files screen. 09H : No PC card is inserted- 0AH : Memory operation failed (...)

10 Page 10 of NEC NP-M311W Command manual

NP-M311W 5 Not used 6 RD- Receive data (-) 7 Not used 8 Not used [ Wired/wireless LAN card ] The LAN connections will differ depending on the commercial LAN card that is used. - For information on supported LAN cards, visit: Global: http://www.nec-pj.com/ [Port Number] The TCP port number used is "7142". ==================================================================== 4. List (...)

11 Page 11 of NEC NP-M311W Command manual

NEC NP-M311W Manual 098-198. PIP/SIDE BY SIDE SET 03H B1H 00H 00H 03H C5H <DATA> CKS 110. AUTO FUNCTIONS EXECUTE 03H B6H 00H 00H 01H <DATA> CKS 111. AUTO ADJUST EXECUTE2 03H BAH 00H 00H 01H <DATA> CKS 305-1. BASE MODEL TYPE REQUEST 00H BFH 00H 00H 01H <DATA> CKS 305-3. PROJECTOR INFORMATION REQUEST 00H BFH 00H 00H 01H <DATA> CKS * Availability by Model ---------------- (...)

12 Page 12 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual Meaning of Symbols -------------------------------------------------------------------- * Supported ! Is available depending on m odel's version - Not Supported Command Name 25 26 27 29 30 31 32 33 34 35 36 37 38 006. RUNNING SENSE * * * * * * * * * * * * * 007. COMMON DATA REQUEST ************* 009. ERROR STATUS REQUEST ************* 015. POWER ON ************* 016. POWER OFF ************* (...)

13 Page 13 of NEC NP-M311W Command manual

NEC NP-M311W Command manual Command Name 1 2 3 4 5 6 7 8 9 10111213141516171819202122232428 006. RUNNING SENSE ***********-**-- -**- --*** 007. COMMON DATA REQUEST ***********-**-- -**- --*** 009. ERROR STATUS REQUEST **************-- -******** 015. POWER ON ******** ***************** 016. POWER OFF ************************* 018. INPUT SW CHANGE ************************* 020. PICTURE MUTE ON ************ ************* 021. PI (...)

14 Page 14 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual In case of VT series 40H In case of NP600 series 40H In case of NP610 series 40H In case of NP2200 series 40H In case of M300 series 40H In case of P420 series 40H In case of GT series 50H In case of HT series 60H In case of WT series 70H In case of HT10 series D0H In case of LT180 series D0H In case of LT30 (...)

15 Page 15 of NEC NP-M311W Command manual

NEC NP-M311W Command manual 0 = No execution (Normal condition) 1 = During execution Bit 6: Selecting signal processing 0 = No execution (Normal condition) 1 = During execution Bit 5: Cooling processing 0 = No execution (Normal condition) 1 = During execution Bit 4 (...)

16 Page 16 of NEC NP-M311W Command manual

NP-M311W DATA05 Cooling processing 00H: No execution (Normal condition) 01H: During execution DATA06 Indication signal number (Entry list number - 1) 0 .. 199 DATA07 Type 1 of input terminal to be selected (!) 01H : 1 02H : 2 03H : 3 04H : 4 05H : 5 DATA08 (...)

17 Page 17 of NEC NP-M311W Command manual

NEC NP-M311W Manual 00H : OFF 01H : ON FFH : Not Supported DATA33 Test pattern display 1 00H : No display (Normal condition) 00H Other : Displaying (Pattern ID) Pattern ID Pattern Name MT LT LT180 LT80 HT GT W T VT NP1000 NP3150 NP905 NP4000 NP4100 NP62 NP64 NP3250 NP216 P420 V300 02HCross Hatch-**-*----*** **** *** 03H Gray Bars ** * * **** * * * - - - - * - * - 04H Raster(0 (...)

18 Page 18 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual Data01 Data70 Data71 01H 00H 03H MT1060/MT1065 01H 01H 03H MT860 01H 02H 03H MT1075 01H 00H 06H NP1000/NP2000 02H 00H 03H LT240/LT260 02H 01H 03H LT220 02H 02H 03H LT240K/LT260K 02H 00H 05H LT245/LT265 02H 00H 06H LT380 02H 01H 06H LT280 03H 00H 04H VT770 03H 00H 06H VT80 Series 03H 00H 07H VT90 Series 04H 00H 01H GT1150 04H 01H 01H GT2150 04H 00H 03H GT5000 04H 01H 03H GT6000 05H 00H 03H HT1000 05H 00H 04H HT1100 06H 00H 03H WT 600 06H (...)

19 Page 19 of NEC NP-M311W Command manual

NEC NP-M311W Manual DATA72 PC Card insertion 00H : Not inserted 01H : Inserted DATA73 USB Mouse connection 00H : Not connected 01H : Connected DATA74 Entry list type 01H : Default 02H : User DATA75 .. 82 Reserved DATA83 On-screen mute (...)

20 Page 20 of NEC NP-M311W Command manual

NEC NP-M311W Manual 009. ERROR STATUS REQUEST ********************************************************************** Function: This command acquires the error information occurring with the projector. Command: 00H 88H 00H 00H 00H 88H Response: At the time of a success 20H 88H 01H xxH 0CH DATA01 .. DATA12 CKS (*1) (*2) (*3) Data Portion Contents -------------------- (...)

21 Page 21 of NEC NP-M311W Command manual

NEC NP-M311W Command manual Supplement: (!) LT/LT80/HT: "None" 015. POWER ON ********************************************************************** Function: This command switches on the main power of the projector. Command: 02H 00H 00H 00H 00H 02H Response: At the time of a success 22H 00H 01H xxH 00H CKS (*1) (*2) (*3) Response: At the time of a failure A2H 00H 01H xxH 02H (...)

22 Page 22 of NEC NP-M311W Command manual

NEC NP-M311W Manual DATA02 Switching number --------------------------------------------------------- When the switching object is the "Signal list", the signal list number is specified. (0…99) --------------------------------------------------------- When the switching object is the "Input connector", the input connector number is specified. NP4000/4100 NP905 NP600 NP62/ (...)

23 Page 23 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual Response: At the time of a success 22H 03H 01H xxH 01H DATA01 CKS (*1) (*2) (*3) Data Portion Contents ------------------------------------------------------------------- DATA01 Results 00H : Normal FFH : Error Response: At the time of a failure A2H 03H 01H xxH 02H DATA01 DATA02 CKS (* (...)

24 Page 24 of NEC NP-M311W Command manual

NEC NP-M311W Command manual 022. SOUND MUTE ON ********************************************************************** Function: This command mutes the sound. Command: 02H 12H 00H 00H 00H 14H Response: At the time of a success 22H 12H 01H xxH 00H CKS (*1) (*2) (*3) Response: At the time of a failure A2H 12H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) ( (...)

25 Page 25 of NEC NP-M311W Command manual

NEC NP-M311W Command manual 025. ONSCREEN MUTE OFF ********************************************************************** Function: This command cancels the blanking of the on-screen display. Command: 02H 15H 00H 00H 00H 17H Response: At the time of a success 22H 15H 01H xxH 00H CKS (*1) (*2) (*3) Response: At the time of a failure A2H 15H 01H xxH 02H DATA01 DATA02 CKS (...)

26 Page 26 of NEC NP-M311W Command manual

NP-M311W DATA03 : 00H (direct settings) 01H (increment/decrement) DATA04 : lower data (8bit) DATA05 : upper data (8bit) ex.1) volume direct setting (value = 20) DATA01 : 05H (Volume) DATA02 : 00H ("Volume" only) DATA03 : 00H (direct setting) DATA04 : 14H (lower data : 20 = 0014<Hex>) DATA05 : 00H (upper data (...)

27 Page 27 of NEC NP-M311W Command manual

NEC NP-M311W Manual ------------------------------------------------------------------- DATA01 .. 02 Results 0000H : Normal 0000H Other : Error Response: At the time of a failure A3H 10H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) Command example: * Setting Volume to "10" 03H 10H 00H 00H 05H 05H 00H 00H 0AH 00H (...)

28 Page 28 of NEC NP-M311W Command manual

NEC NP-M311W Command manual DATA04 DATA05 Aspect Ratio 4:3 (Window) 00H 00H Aspect Ratio Normal / Auto (NP600, NP610, NP2200, NP62, NP64, NP216, P420, U300, V300 Series) 00H 00H Aspect Ratio 1.25:1(5:4) 00H 00H Aspect Ratio Letter Box 01H 00H Aspect Ratio 1.33:1(4:3) 01H 00H Aspect Ratio Wide Zoom (NP600, NP610, NP2200, NP62, NP64, NP216, P420, V300 Series) 01H 00H Aspect Ratio Wide Screen 02H 00H Aspect Ratio 1.78:1(16:9) 02H 00H Aspect Ratio Cinema / 16:9 (N (...)

29 Page 29 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual Supplement: (!) Lamp Hour Meter This is the timer for normal lamp mode conversion. Lamp Timer Acquisition Examples DATA83 DATA84 DATA85 DATA86 : Lamp Timer 00H 00H 00H 00H : Total 0 seconds C0H 65H 52H 00H : Total 5400000 seconds/3600 = 1500 hours 00H E4H 57H 00H : Total 5760000 seconds/3600 = 1600 hours Calculator Procedure 1) Set calculator to (...)

30 Page 30 of NEC NP-M311W Command manual

NP-M311W Calculator Procedure 1) Set calculator to HEX 2) Punch in DATA12 DATA11 DATA10 DATA09 (006DDD00) 3) Change from HEX to Decimal - value will change to 7200000 seconds Lamp remaining time (in terms of Normal mode values) = (7200000 - 10800) / 3600 = 1997 hour 037-2. LAMP INFORMATION REQUEST 2 ********************************************************************** Function: This command acquires l (...)

31 Page 31 of NEC NP-M311W Command manual

NP-M311W to appear (in terms of Normal mode values) 0AH : Remaining time until lamp warning message starts to appear (in terms of Eco mode values) 10H : Remaining time until inhibition of lamp usage (in terms of specified values) 11H : Remaining time until inhibition of lamp usage (in terms of Normal mo (...)

32 Page 32 of NEC NP-M311W Command manual

NEC NP-M311W Manual 037-7. LAMP INFORMATION REQUEST 4 ********************************************************************** Function: This command acquires the information on the projector lamp. Command: 03H 9BH 00H 00H 03H DATA01 DATA02 DATA03 CKS (*3) Data Portion Contents ----------------------------------------------------------------- DATA01 Target (...)

33 Page 33 of NEC NP-M311W Command manual

NP-M311W (!1) X = 100 - ((Lamp Use Prohibited Time * 100) / Lamp Use Warning Starting Time) Example) The case of Lamp Use Prohibited Time 2100[H]A Lamp Use Warning Starting Time 2000[H] Model. X = 100 - ((2100 * 100) / 2000) = -5[%] (!2) Lamp Hour Meter This is the timer for normal lamp mode conversion. (!3) Lamp usage time This is the lamp total usage. It is displayed in the projector's menu. (! (...)

34 Page 34 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual DATA01 07H fixed DATA02 Results 00H : Normal 01H : Error Response: At the time of a failure A3H B1H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 046. WXGA MODE SETTING REQUEST ********************************************************************** Function: This command acquire (...)

35 Page 35 of NEC NP-M311W Command manual

NP-M311W DATA02 Results 00H : Normal 01H : Error Response: At the time of a failure A3H B1H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) ====================================================================== 6. Response ---------------------------------------------------------------------- * At the time of a s (...)

36 Page 36 of NEC NP-M311W Command manual

NP-M311W ------------------------------------------------------------------- DATA01 .. 02 : Remote control key code (Word type) Key number DATA01 DATA02 Key name -------------------------------------------- 1 01H 00H POWER 2 02H 00H POWER ON (!!) 3 03H 00H POWER OFF (! (...)

37 Page 37 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual 79 4FH 00H VIDEO1 (!!) 80 50H 00H VIDEO2 81 51H 00H S-VIDEO1 (!!) 82 52H 00H S-VIDEO2 83 53H 00H DIGITAL1 84 54H 00H DIGITAL2 85 55H 00H PC CARD (...)

38 Page 38 of NEC NP-M311W Command manual

NP-M311W Command example: * Sending the AUTO key code 02H 0FH 00H 00H 02H 05H 00H 18H * Sending the AUTO (SHORT) key code 02H 0FH 00H 00H 02H DDH 00H F0H ------------------------------------------ * cycle/toggle volume mute * cycle/toggle picture mute * cycle/toggle picture freeze 02H 0FH 00H 00H 02H DATA01 DATA02 CKS Data Portion Contents --------------------------------- (...)

39 Page 39 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual 051. CARBON SAVINGS INFORMATION REQUEST ********************************************************************** Function: This command acquires the Carbon Saving values on the projector. Command: 03H 9AH 00H 00H 01H DATA01 CKS (*3) Data Portion Contents ------------------------------------------------------------------- DATA01 Acquirement items 00H : (...)

40 Page 40 of NEC NP-M311W Command manual

NP-M311W 060. GAIN PARAMETER REQUEST 2 ********************************************************************** Function: This command acquires the adjustment values. Command: 03H 04H 00H 00H 03H DATA01 .. DATA03 CKS (*3) Data Portion Contents ------------------------------------------------------------------- DATA01 .. 02 Acquirement items (!) DATA03 (...)

41 Page 41 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual (! ) Acquirement items DATA01 DATA02 Acquirement name 00H 00H Picture / Brightness 01H 00H Picture / Contrast 02H 00H Picture / Color 03H 00H Picture / Hue 04H 00H Picture / Sharpness 05H 00H Volume 05H 01H Sound / Bass 05H 02H Sound / Treble 06H 00H Blanking / Top 06H 01H Blanking / Bottom 06H 02H Blanking / Left 06H 03H Blanking / Right 06H (...)

42 Page 42 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual 4CH 07H Color Correction / Yellow 4CH 08H Color Correction / Magenta 4CH 09H Color Correction / Cyan 4CH 0AH Color Correction / White 4DH 00H Through 4EH 00H Ref. Auto White / Color Temp R 4EH 01H Ref. Auto White / Color Temp G 4EH 02H Ref. Auto White / Color Temp B 4FH 00H Position 50H 00H Screen Position 51H 00H Sweet Vision 51H 01H Sweet Vision / Split 52H 00H Sub Color / R 52H 01H Sub Color / G 52H 02H Sub Color / B 53H 00H Picture (...)

43 Page 43 of NEC NP-M311W Command manual

NEC NP-M311W Desktop, Projector Manual 077. MUTE CONTROL ********************************************************************** Function: This command controls the mute of picture, sound and on-screen. Command: 02H 1AH 00H 00H 02H DATA01 DATA02 CKS (*3) Data Portion Contents ------------------------------------------------------------------- DATA01 Setting items 00H : (...)

44 Page 44 of NEC NP-M311W Command manual

NEC NP-M311W Manual DATA01 DATA02 DATA03 01H 00H 03H MT1060/MT1065 01H 01H 03H MT860 01H 02H 03H MT1075 01H 00H 06H NP1000/NP2000 02H 00H 03H LT240/LT260 02H 01H 03H LT220 02H 02H 03H LT240K/LT260K 02H 00H 05H LT245/LT265 02H 00H 06H LT380 02H 01H 06H LT280 03H 00H 06H VT80 Series 03H 00H 07H VT90 Series 04H 00H 01H GT1150 04H 01H 01H GT2150 04H 00H 03H GT5000 04H 01H 03H GT6000 05H 00H 03H HT1000 06H 00H 03H WT600 06H 00H 05H WT610/WT615 08H 00H 07H NP400 (...)

45 Page 45 of NEC NP-M311W Command manual

NEC NP-M311W Manual DATA04 Sound function 00H : Not available 01H : Available DATA05 Calendar function 00H : No function 01H or 03H : Timer function, sleep timer function 02H : Sleep timer function DATA06 .. 32 Reserved Response: At the time of a failure A0H 85H 01H xxH 02H DATA01 DATA02 CKS (*1 (...)

46 Page 46 of NEC NP-M311W Command manual

NP-M311W 01H : Connected DATA09 .. 16 Reserved Response: At the time of a failure A0H 85H 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 078-3. INPUT STATUS REQUEST ********************************************************************** Function: This command acquires the status of input signal of the projector. Command: 00H 85H 0 (...)

47 Page 47 of NEC NP-M311W Command manual

NP-M311W DATA06 Test pattern display 00H : No display(Normal condition) 01H : Displaying DATA07 ..08 Reserved DATA09 Indicate Contents 00H = Picture signal displaying 01H = No signal 02H = Viewer displaying 03H = Test pattern displaying 04H = LAN displaying DATA10 .. 16 Reserved Resp (...)

48 Page 48 of NEC NP-M311W Command manual

NEC NP-M311W Command manual 078-5. MODEL NAME REQUEST ********************************************************************** Function: This command acquires the model name of the projector. Command: 00H 85H 00H 00H 01H 04H 8AH Response: At the time of a success 20H 85H 01H xxH 20H DATA01 .. DATA32 CKS (*1) (*2) (*3) Data Portion Contents ---------------------------- (...)

49 Page 49 of NEC NP-M311W Command manual

NEC NP-M311W Command manual [079. FREEZE CONTROL] ********************************************************************** Function: This command controls the freeze. Command: 01H 98H 00H 00H 01H DATA01 CKS Operation types DATA01: 00H : Reserved 01H : Freeze start 02H : Freeze cancel Response: At the time of a success 21H 98H ID *0H 01H DATA01 CKS Data Portion Contents - (...)

50 Page 50 of NEC NP-M311W Command manual

NP-M311W Command: 03H B0H 00H 00H 02H DATA01 DATA02 CKS Data Portion Contents ------------------------------------------------------------------- DATA01 C5H fixed DATA02 Acquisition Object 00H : MODE 01H : POSITION 02H : SOURCE Response: At the time of a success 23H B0H 01H xxH 03H DATA01 DATA02 DATA03 CKS (*1) (*2) (...)

51 Page 51 of NEC NP-M311W Command manual

NEC NP-M311W Command manual 02H : BOTTOM-LEFT 03H : BOTTOM-RIGHT if DATA02 is SOURCE(02H) 00H : OFF 01H : VIDEO 02H : S-VIDEO Response: At the time of a success 23H B1H 01H xxH 03H DATA01 DATA02 DATA03 CKS (*1) (*2) (*3) Data Portio (...)

52 Page 52 of NEC NP-M311W Command manual

NP-M311W 111. AUTO ADJUST EXECUTE2 ********************************************************************** Function: This command executes the Auto Adjust. Command: 03H BAH 00H 00H 01H 00H BEH Response: At the time of a success 23H BAH 01H xxH 01H 00H CKS (*1) (*2) (*3) Response: At the time of a failure A3H BAH 01H xxH 02H DATA01 DATA02 CKS (...)

53 Page 53 of NEC NP-M311W Command manual

NP-M311W DATA02 DATA03 DATA13 DATA14 00H 01H 00H 03H MT1060/1065 00H 01H 02H 03H MT860 00H 01H 02H 03H MT1075 00H 01H 00H 06H NP1000/NP2000 00H 02H 00H 03H LT240/LT260 00H 02H 01H 03H LT220 00H 02H 02H 03H LT260K 00H 02H 00H 05H LT245/LT265 00H 02H 00H 06H LT380 00H 02H 01H 06H LT280 02H 02H 00H 05H LT180 02H 02H 00H 06H LT25/LT30/LT35 02H 02H 00H 07H NP40/NP50/NP60 00H 03H 00H 04H VT770 01H 03H 00H 06H VT80 Series 01H 03H 00H 07H VT90 Series 00 (...)

54 Page 54 of NEC NP-M311W Command manual

NEC NP-M311W Manual DATA15 ... 16 Reserved Response: At the time of a failure A0H BFH 01H xxH 02H DATA01 DATA02 CKS (*1) (*2) (*4) (*3) 305-3. PROJECTOR INFORMATION REQUEST ********************************************************************** Function: This command acquires basic operation states of projector. Command: 00H (...)

55 Page 55 of NEC NP-M311W Command manual

NEC NP-M311W Manual 09H : SLOT2 0AH : SLOT3 0BH : SLOT4 0CH : DIGITAL2 0DH : SCART 10H : AUTO FFH : Not Source Input Other : Not Support DATA06 Indication signal type (Effective only when Select source input type 2 is 02H or 03H) (...)

56 Page 56 of NEC NP-M311W Command manual

NEC NP-M311W Command manual ====================================================================== 6.1. Response ---------------------------------------------------------------------- * At the time of a success (ACK) This returns ACK without adding data portion to the command that does not request data. This returns ACK with adding data to the data portion for the command that requests data. * At the time of a failure (NAK) This adds a cause of not a (...)

Related Devices for NEC NP-M311W