Apple iMac Service Source

Apple Adapter, Desktop IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source Free PDF Download on Guides-Base.com

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop PDF Service source

  • Model: IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo
  • Brand: Apple
  • Type: Service source
  • Category: Adapter, Desktop
  • File Size:
  • No. of pages: 160
Download Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo PDF Manual

Also for Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo:

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Summary of Contents:

Page view Summary of Page's Content
1 Page 1 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual  Service Source © 2006 Apple Computer, Inc. All rights reserved. iMac iMac (17-inch Mid 2006) and iMac (17-inch Late 2006 CD) 24 April 2007 (...)

2 Page 2 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo ii iMac Contents General Information 5 Product View 5 Note About Images in This Manual 5 Tools Required 6 Serial Number Location 7 Safety 8 Opening the Computer 9 Access Tool Modication 9 EMI Shielding 12 Lower EMI Shield 13 What’s New 16 23 April 2007 16 12 January 2007 16 31 October 2006 16 3 October 2006 16 2 October 2006 16 6 September 2006 16 11 July 2006 17 5 July 2006 17 Take Apart Access Door 19 Memory (...)

3 Page 3 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iii LVDS Display Cable 56 Inverter 61 Speakers 64 Optical Drive 67 Hard Drive 74 Power Supply 79 Logic Board 87 CPU Fan 92 Optical Drive Fan 94 Hard Drive Fan 96 AC Power Inlet 98 Ambient Light Sensor Board 102 Clutch Mechanism 106 AirPort Antenna 110 Camera Cable 113 Chassis 117 Rear Housing 120 Troubleshooting General Information 122 Serial Number 122 Power On Self Test (POST) 122 DDR Memory 123 How to Reset the S (...)

4 Page 4 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iv AirPort 144 IR Remote 145 IR Sensor/Receiver 146 Built-in iSight Camera 147 Speakers 149 Mouse 150 Keyboard 151 Error Beep(s) 152 USB 153 Views Upper Exploded View 156 Lower Exploded View 157 Screw Chart 158 Screw Chart Page 1 158 Screw Chart Page 2 159 (...)

5 Page 5 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 5 General Information Product View Note About Images in This Manual Because a pre-production model was used for most of the images shown in this manual, you may notice small dierences in appearance between the image pictured and the computer you are servicing. However, although the appearance diers, the steps and sequence are the same unless noted. (...)

6 Page 6 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 6 Tools Required The following tools are required to service the computer. Note that a special access card (part 922-7172) is required to open the front bezel. ESD-safe workstation and mat Soft, clean towel or cloth (to protect the display and removed parts from scratches) Access card (part 922-7172) Black stick (or other nonconductive nylon or plastic at-blade (...)

7 Page 7 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 7 Serial Number Location iMac serial numbers are located on the bottom of the computer stand. Note: iMac computers using Intel processors will not have the G5 listed in the conguration (as shown below). (...)

8 Page 8 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 8 Safety Warning: When the iMac is under power, be aware that the power supply contains high voltages that pose a potential hazard to your personal safety. Never work on or near the power supply with the unit powered on, and as a further precaution always make sure the unit is unplugged when working on it with the front bezel removed. WARNING: HIGH VOLTAGE Text (...)

9 Page 9 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 9 Opening the Computer Apple authorized, desktop certied technicians only should ever remove the front bezel on the iMac. When the front bezel is removed, be sure to always ground yourself and follow ESD-safe repair practices Removing the front bezel requires using a special access card (part 922-7172) to release latches located inside the upper corners of th (...)

10 Page 10 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 10 Cut the EMI gasket to the edge of the access card. Using packing tape, or something equivalent, fold the tape over the EMI gasket to attach the gasket to the card. 2. 3. (...)

11 Page 11 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 11 Bend the card at a slight angle at the top to make sure the card makes contact with each latch. Refer to Removing the Front Bezel for the complete procedure. 4. 5. (...)

12 Page 12 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 12 EMI Shielding The iMac enclosure is wrapped in EMI shielding that is easily torn and damaged. To maintain a properly shielded unit, you must repair all accidental tears and cracks to the shielding by covering them with EMI tape. Order EMI tape, part number 922-4786 (a long, thin strip) or 922-EMI tape, part number 922-4786 (a long, thin strip) or 922- 5026 ( (...)

13 Page 13 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 13 Lower EMI Shield EMI tape covers the top and sides of the display panel, and the lower EMI shield covers the logic board along the bottom of the unit. The EMI tape and lower EMI shield are easily damaged when removed, and removal is necessary in order to access most components within the unit. Should the EMI tape that seals the display, or the EMI shield cove (...)

14 Page 14 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 14 Pay particular attention to the EMI shielding inside the rear housing, shown below. The EMI shield is easily damaged when replacing modules Lower EMI Shield EMI tape covers the top and sides of the display panel, and the lower EMI shield covers the logic board along the bottom of the unit. The EMI tape and lower EMI shield are easily damaged when removed, and (...)

15 Page 15 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 15 When properly repaired, all edges shown below will be wrapped by EMI tape, and the tape securely adhered to all edges. Use a black stick to atten the EMI tape tightly and rub out air pockets and wrinkles. (...)

16 Page 16 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 16 What’s New 23 April 2007 The optical drive removal procedure has been updated. Using a screwdriver to release the optical drive tabs is causing damage to the logic board. The updated procedure shows how to remove the optical drive using a needlenose pliers. Additional information on handling slot-load optical drives can be referenced in Kbase article 30528 (...)

17 Page 17 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — General Information 17 Logic board (661-4116) Hard Drive (661-4175) Stand (922-7832) Screw, T10, Flat head (922-7749) 11 July 2006 Updated the screw chart with photos of 922-7654 and 922-7655 5 July 2006 Introduction: iMac (17-inch Mid 2006) Troubleshooting LEDs on the logic board Logic board, dual core 1.83 GHz DC-DC board is now incorporated onto the main logic board Power supply (...)

18 Page 18 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual  Service Source © 2005 Apple Computer, Inc. All rights reserved. Take Apart iMac (17-inch Mid 2006), iMac (17-inch Late 2006 CD) (...)

19 Page 19 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Access Door 19 Access Door Tools Phillips #2 screwdriver. ESD-safe workstation and mat Soft, clean towel or cloth Preliminary Steps Before you begin, lay the computer down so the panel is face down and the bottom is facing you. Part Location • • • (...)

20 Page 20 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Access Door 20 Removing the Access Door Raise the stand and use a Phillips #2 screwdriver to loosen the two captive screws that secure the memory access door. Remove the access door. Replacing the Access Door Make sure the memory ejector tabs are in the closed position before attaching the access door. Position the access door on the rear housing over the memory compartment. Lift (...)

21 Page 21 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Memory 21 Memory Tools Phillips #2 screwdriver. ESD-safe workstation and mat Soft, clean towel or cloth Preliminary Steps Before you begin, lay the computer down so the panel is face down and the bottom is facing you. Part Location • • • (...)

22 Page 22 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Memory 22 Removing the Memory Important: Always discharge static before you touch any parts such as the memory board. To avoid generating static electricity, do not walk around the room until you have nished replacing the memory. Pull the two levers in the memory compartment toward you. Pull HARD! If a memory module is installed in the slot, pulling the levers will dislodge it. (...)

23 Page 23 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Memory 23 Replacing the Memory Make sure the DIMM levers are all the way open. With the computer face down, orient the DIMM with the notch on the left. With your ngers, press the DIMM fully into the slot until you hear a click. After inserting the memory, fold the DIMM levers closed. There will be a slight resistance and you will hear a click when they fold into the closed pos (...)

24 Page 24 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Front Bezel 24 Front Bezel Tools Access card tool 922-7172 Torx T8 screwdriver Preliminary Steps Before you begin, follow steps for removing the access door and the memory. Part Location • • (...)

25 Page 25 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Front Bezel 25 Removing the Front Bezel With the bottom facing toward you use a T8 torx screwdriver to remove the four bezel mounting screws. Note: The screw to the right of the door is longer. Stand the computer upright. Located the access card tool. Bend the upper quarter of the access tool card slightly to engage the front bezel latches. Note: Refer to Access Tool Modicatio (...)

26 Page 26 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Front Bezel 26 This picture is intended to show how the access tool disengages the latch. Pushing the tool up the vent on the rear cover releases the latch on the inside of the front bezel. Refer to the next step for the procedure. Start on the left side (looking from the back of the unit). Insert the card to disengage the latch. Squeeze the top of the bezel, that will help take (...)

27 Page 27 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Front Bezel 27 Repeat step 5 to release the locking latch in the right corner. Again, pull the bezel away as the card releases the latch. If the bezel won’t release, pull the bottom of the bezel out a bit and insert the access card again. 6. 7. (...)

28 Page 28 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Front Bezel 28 Repeat step 7 for the left side. Once the access card has been removed, it is safe to open the bezel. Position the unit on an ESD mat, with the bottom facing toward you. Caution: Make sure the memory levers are closed and not protruding from the bezel when removing the bezel. 8. 9. (...)

29 Page 29 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Front Bezel 29 Lift the bottom of the front bezel straight up to remove it, and swing the bezel over onto its top edge so you can disconnect two cables attached to the top of the bezel. 10. (...)

30 Page 30 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Front Bezel 30 Swing the bezel up so you can disconnect the two camera board cables Remove the any kapton tape and disconnect the camera and microphone cables from the camera board.. If replacing a damaged front bezel, remove the camera board. 11. 12. (...)

31 Page 31 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Front Bezel 31 Replacing the Front Bezel Position the front bezel near the top edge of the unit and connect the two camera board connectors. Make sure the black EMI shielding along the top of the LCD panel is not in the way of the locking mechanisms when you lower the front bezel onto the computer. Use a black stick to press (re-stick) the EMI shielding along the top of the panel. (...)

32 Page 32 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Front Bezel 32 Make sure the memory ejector levers are in the closed position (as shown) before lowering the front bezel over the ejectors. Continue to lower the font bezel down and press the top corners of the front bezel to connect the latches. Note: Check that the latches are connected by lifting the front bezel at each corner. Replace the four bezel screws along the bottom of (...)

33 Page 33 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Camera Board 33 Camera Board Tools The only tool required for this procedure is a T6 screwdriver. Preliminary Steps Before you begin, follow steps for removing the access door and front bezel. Part Location (...)

34 Page 34 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Camera Board 34 Removing the Camera Board The camera board and cables are visible as you lift the front bezel o the computer. Disconnect the camera and microphone cables. 1. 2. (...)

35 Page 35 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Camera Board 35 Using a T6 screwdriver, peel back the mylar and kapton tape as necessary and remove the two camera board mounting screws. Pull the camera board straight out of the lens aperture in the bezel to remove it. 3. 922-7713 (...)

36 Page 36 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Camera Board 36 Replacing the Camera Board Carefully align and insert the camera lens until it is snug in the bezel aperture. Install the camera board to the bezel with two mounting screws. Replace the front bezel. Replace the access door. 1. 2. 3. 4. 922-7713 (...)

37 Page 37 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006) Take Apart — Lower EMI Shield — 37 Lower EMI Shield Tools The only tool required for this procedure is a “black stick” (or other nonconductive nylon or plastic at-blade tool). Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Part Location • • (...)

38 Page 38 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006) Take Apart — Lower EMI Shield — 38 Removing the Lower EMI Shield Carefully peel the lower EMI shield o the bottom edge and side of the rear housing. Use a black stick to help peel back the shield. If replacing a torn or damaged lower EMI shield, peel the lower EMI shield o the bottom edge of the display. Replacing the Lower EMI Shield Position the lower EMI shield over the bottom of the u (...)

39 Page 39 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — IR Board 39 IR Board Tools Torx T8 screwdriver (magnetized) Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield Part Location • • • • (...)

40 Page 40 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — IR Board 40 Removing the IR Board Using a Torx T8 screwdriver, remove the two IR screws and disconnect the IR cable from the IR board connector. Remove the IR board from its mounting bracket. Replacing the IR Board Install the IR board and two mounting screws. Connect the IR cable to the IR board connector. Replace the lower EMI shield. Replace the front bezel. Replace the access (...)

41 Page 41 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — IR Board 41 (...)

42 Page 42 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — AirPort Card 42 AirPort Extreme Card Tools The only tool required for this procedure is a Torx T6 screwdriver (magnetized). Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield Part Location • • • (...)

43 Page 43 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — AirPort Card 43 Removing the AirPort Extreme Card Disconnect the antenna cable from the AirPort Extreme card connector and remove the two T6 screws securing the card to the logic board. The card will spring up when the screws are removed. Grab the card from the connector end, pull the card from its socket on the logic board. 1. 2. 922-7010 (...)

44 Page 44 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — AirPort Card 44 Replacing the AirPort Extreme Card Install the AirPort Extreme card into the socket. Install the two mounting screws securing the card to the logic board. Connect the AirPort antenna cable to the connector closest to the memory slot. Replace the lower EMI shield. Replace the front bezel. Replace the access door. 1. 2. 3. 4. 5. 6. 922-7010 (...)

45 Page 45 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006) Take Apart — Battery 45 Battery Tools The only tool required for this procedure is a black stick. Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield Part Location • • • (...)

46 Page 46 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006) Take Apart — Battery 46 Removing the Battery Pry the battery from the battery slot. Replacing the Battery Slide the battery (with voltage information face up) into the battery holder. Replace the lower EMI shield. Replace the front bezel. Replace the access door. 1. 1. 2. 3. 4. (...)

47 Page 47 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006) Take Apart — Battery 47 (...)

48 Page 48 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Display Panel 48 LCD Display Tools Torx T10 screwdriver Torx T6 screwdriver Black stick (or other nonconductive nylon or plastic at-blade tool) Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield Part Location • • • • • • (...)

49 Page 49 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Display Panel 49 Removing the LCD Display Using the black stick, or access tool, carefully peel back the EMI shielding from the left, right, and bottom edges of the computer Using a Torx T6 screwdriver, remove the two LVDS cable connector screws. Disconnect the LVDS display cable from the logic board. Below the LVDS connector, disconnect the inverter cable from the logic board. (...)

50 Page 50 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Display Panel 50 Peel the EMI tape away from each side of the panel. Using a Torx T10 screwdriver, remove the four panel mounting screws. Pivot the panel up, as shown, then carefully peel the top edge of the panel away from the EMI shield. 3. 4. 922-7023 (...)

51 Page 51 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Display Panel 51 Note: If replacing a bad LCD display, you will also need to remove the lower EMI shield (if still attached), the display panel mounting brackets, and the LVDS cable as follows. If attached, peel the lower EMI shield o the bottom edge of the display panel. Using a torx T10 screwdriver, push the tape aside and remove two screws from the left side panel mounting bra (...)

52 Page 52 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Display Panel 52 To access the LVDS cable connector, peel back the black mylar tape that partially covers the LVDS connector. Remove the tape securing the LVDS connector to the panel connector. 8. 9. (...)

53 Page 53 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Display Panel 53 Pinch together the connector locking levers, and disconnect the LVDS cable connector. Return the panel to Apple. 10. 11. (...)

54 Page 54 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Display Panel 54 Replacing the LCD Display Replace the LVDS cable on the rear of the display panel. Secure the LVDS cable with tape. If you are replacing the display, a piece of black mylar is enclosed in the box with the display module. The dotted lines below show the correct placement of the mylar. Note: The LVDS locking lever (on one side) should be covered by the mylar wh (...)

55 Page 55 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Display Panel 55 Replace the right panel mounting bracket on the display panel with two screws. Replace the left bracket on the display panel with two screws. Connect the two inverter-to-display cable connectors and tape them to the back of the display panel. Tape the middle inverter cable to the back of the display as well. Turn over the panel. If the lower EMI shield was r (...)

56 Page 56 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — LVDS Cable 56 LVDS Display Cable Tools No tools are required to remove the LVDS (Low Voltage Dierential Signaling) cable. Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield LCD Display Part Location • • • • (...)

57 Page 57 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — LVDS Cable 57 Remove the LVDS Cable Locate the LVDS cable on the back side of the display panel. Remove the piece of tape (circled) that secure the cable to the panel. To access the connector, peel back the black mylar tape that partially covers the LVDS connector. Remove the tape securing the LVDS connector to the panel connector. 1. 2. (...)

58 Page 58 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — LVDS Cable 58 Pinch together the connector locking levers, and disconnect the LVDS cable connector. 3. (...)

59 Page 59 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — LVDS Cable 59 Replacing the LVDS Cable Position the LVDS cable on the back of the display panel as shown. Connect the LVDS cable connector. When connected correctly the locking levers will secure the connector and it cannot be disconnected without depressing the levers. Secure the LVDS cable to the panel with one strip of tape. 1. 2. 3. (...)

60 Page 60 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — LVDS Cable 60 Replace the display panel. Note: If you are replacing the display, a piece of black mylar is enclosed in the box with the display module. The dotted lines below show the correct placement of the mylar. The LVDS locking lever (on one side) will be covered by the mylar when positioned correctly. ( Replace the lower EMI shield. Replace the front bezel. Replace the acces (...)

61 Page 61 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Inverter 61 Inverter Tools Removing the inverter requires using a at-blade screwdriver Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield LCD Display Part Location • • • • (...)

62 Page 62 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Inverter 62 Removing the Inverter Remove three pieces of tape that secure the inverter cables to the back of the display panel, and disconnect the two white inverter connectors shown. Using a at-blade screwdriver as shown, pry up the inverter to remove it from inside the display panel mounting bracket. 1. 2. (...)

63 Page 63 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Inverter 63 Replacing the Inverter Insert the long, black inverter cable through a hole at the back center of the right mounting bracket, and press the sticky side of the replacement inverter onto the back edge of the bracket. Connect the inverter-to-display cables and tape them to the back of the display panel. . Replace the display panel. Replace the lower EMI shield. Replace the (...)

64 Page 64 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Speaker 64 Speakers Tools Torx T10 screwdriver (magnetized) Torx T6 screwdriver (magnetized) Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield LCD Display Part Location • • • • • • (...)

65 Page 65 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Speaker 65 Removing the Speakers Using a T10 torx screwdriver, remove the screws from the left and right speakers. Replacement Note: The longer of the two speaker mounting screws is used to secure the left speaker; the shorter screw secures the right speaker. Lift the speakers straight up and disconnect the speaker cable under the right speaker. 1. 2. 922-7067 922-7068 (...)

66 Page 66 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Speaker 66 Replacing the Speakers Connect the speaker cable connector to the logic board. Install the speakers and route the speaker wire above the heatsink and around the fan. Secure the right speaker with the shorter of the two mounting screws. Secure the left speaker with the longer of the two mounting screws. Replace the display panel. Replace the EMI shield. Replace the front (...)

67 Page 67 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive 67 Optical Drive Tools Torx T10 screwdriver (magnetized) Torx T6 screwdriver (magnetized) Needlenose pliers (with teeth) Preliminary Step Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield LCD Display Part Location • • • • • • • (...)

68 Page 68 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive 68 Removing the Optical Drive Disconnect the sensor cable from the temperature sensor on top of the optical drive and remove the two T10 screws from the optical drive clip on the logic board. Note: Make sure to use a needlenose pliers with teeth to remove the optical drive. The pliers must have a textured surface to properly grasp the optical drive release tabs. 1. 2 (...)

69 Page 69 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive 69 Locate the black tabs at each side of the plastic optical drive mounting bracket. Starting at the release tab that is furthest from the logic board, grasp the tab with needlenose pliers, and ex the tab toward the optical drive exible cable. (Note: This graphic shows a dierent iMac model, but the removal procedure is the same for each model.) Use one nge (...)

70 Page 70 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive 70 Warning: iMac main logic boards returned with physical damage such as scratches, fractures, or broken or missing components caused by improper servicing may be classied as customer abuse. When using a tool to release the latches, be careful not to apply pressure to the logic board or it may be damaged. While avoiding the logic board, grasp the tab with needle (...)

71 Page 71 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive 71 Lift the rear of the drive and pull the front bezel of the drive straight back and out of the disc opening in the rear housing. If replacing a bad optical drive, use a T6 torx screwdriver to remove two optical drive board mounting screws. Disconnect and keep the board for installation on the replacement drive. If replacing a bad optical drive, also remove the tempe (...)

72 Page 72 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive 72 Replacing the Optical Drive If removed, install the optical drive board to the optical drive with two T6 screws. Insert the optical drive “bezel-end-rst” into the opening in the housing. Be sure to align the two guide holes in the front bezel with guide posts at each end of the bezel opening. Push down on the black mounting bracket to lock the optical drive (...)

73 Page 73 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive 73 (...)

74 Page 74 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD ) Take Apart — Hard Drive 74 Hard Drive Tools: Torx T10 screwdriver (magnetized) T8 Flat-blade screwdriver Preliminary Steps Before you remove: Access door Front bezel Lower EMI shield LCD display Part Location • • • • • • • (...)

75 Page 75 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD ) Take Apart — Hard Drive 75 Remove the Hard Drive Position yourself at the base of the computer closest to the stand. Pull in on the edge of the mounting bracket until you feel it release from the chassis. Pull HARD! The hard drive bracket will release on the end near your hands. Disconnect the hard drive power and data cables. Set the hard drive aside. 1. 2. 3. (...)

76 Page 76 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD ) Take Apart — Hard Drive 76 Note: If you are replacing a bad hard drive, remove the mounting bracket and the mounting pins shown in the following steps before returning the bad drive to Apple. Using a T10 torx screwdriver, remove two screws and the mounting bracket from the drive. Using a T8 torx screwdriver, remove two mounting pins from the other side of the drive. 4. 5. 6. 922-7019 922-7001 (...)

77 Page 77 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD ) Take Apart — Hard Drive 77 Replacing the Hard Drive If necessary, install two mounting pins on side of the hard drive mounting bracket. If necessary, install the mounting bracket to the top of the hard drive with two screws. Connect the hard drive power and data cables. Insert the hard drive mounting pins and position the drive on the chassis. Make sure the hard drive power and data cables are r (...)

78 Page 78 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD ) Take Apart — Hard Drive 78 (...)

79 Page 79 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply 79 Power Supply The iMac (17-inch MId 2006/Late 2006 CD) computer was built with two versions of the power supply: Version 1: iMac (Mid 2006) power supply Version 2: iMac (Early 2006) power supply This procedure provides instructions for replacing both versions. Note: The power supplies must be replaced like for like. Tools Removing the power supply requires using the (...)

80 Page 80 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply 80 Part Location Version 1 Power Supply (661-4018) ( Version 2 Power Supply (661-3780) (...)

81 Page 81 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply 81 About the Power Supply Warning: When the iMac is under power, be aware that the power supply contains high voltages that pose a potential hazard to your personal safety. Never work on or near the power supply with the unit powered on, and as a further precaution always make sure the unit is unplugged when working on it with the front bezel removed. WARNING: HIGH VOL (...)

82 Page 82 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply 82 Removing the Power Supply Version 1 Power Supply (661-4018) WARNING: HIGH VOLTAGE Disconnect the AC power inlet connector on the left and the power supply-to-logic board connector on the right. Note: The power supply connector is on the underside of the logic board. See the next photo for another view of the connector underneath the logic board. Rotate the computer (...)

83 Page 83 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply 83 Using a T8 screwdriver, remove the two self-tapping screws on the left side of the power supply board and the two machine screws on the right side of the board. Note: Self-tapping screw labeled S1 is longer than self-tapping screw S2. Remove the power supply from the enclosure. 3. 4. 922-7066 922-7654 (S2 in photo 922-7159 (S1 in photo) (...)

84 Page 84 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply 84 Version 2 Power Supply (661-3780) WARNING: HIGH VOLTAGE Disconnect the short AC power inlet connector on the right side of the power supply board, and the power supply-to-logic board connector at the top of the board. Using a T10 screwdriver, Remove the T10 AC power inlet ground-to-chassis screw. 1. 2. 922-7069 (...)

85 Page 85 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply 85 Using a T10 screwdriver, remove the three self-tapping screws on the top and left sides of the power supply board and the one machine screw on the lower right corner of the board. Remove the power supply from the enclosure. If you are replacing the power supply-to-logic board cable, disconnect the cable from the logic board and remove the cable from the enclosure. (...)

86 Page 86 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Power Supply 86 Replacing the Power Supply Power Supply (661-4018) WARNING: HIGH VOLTAGE Position the power supply loosely in its mounting location. Connect the power supply-to-AC power inlet cable. Tuck the cable beneath the chassis and away from the hard drive bay. Connect the power supply-to-logic board cable to the underside of the logic board. Install the four power supply scre (...)

87 Page 87 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Logic Board 87 Logic Board Tools Removing the optical drive requires using the following tools: Torx T10 screwdriver (magnetized) Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield LCD display Hard Drive Optical drive Speakers Memory Part Location • • • • • • • • • (...)

88 Page 88 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Logic Board 88 Removing the Logic Board Disconnect the ten cables from the connectors on the logic board. Note: The speakers would already be removed. Using a T10 torx screwdriver, remove the screws from the logic board. Note the locations of the three self-tapping screws (marked by and “S” in the photo). The rest of the screws are machine screws. 1. 2. 922-6800 922-6842 (...)

89 Page 89 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Logic Board 89 Rotate the unit so the power supply is in the bottom right corner and the optical drive is on your left. With a black stick, disconnect the power supply cable on the underside of the logic board. Pull the board toward you and slightly lift the board up. Note: The I/O ports t tightly into the port hole openings on the rear cover. You may have to dget with the b (...)

90 Page 90 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Logic Board 90 Replacing the Logic Board Pull all cables up and away from the logic board bay and gently place down the logic board so that all screw holes are aligned with screw mounts in the chassis. Replacement Note: The logic board should rest on the screw mounts without any binding or bowing—if it doesn’t, adjust any cables that are interfering with the logic board. Insta (...)

91 Page 91 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Logic Board 91 Replace the hard drive. Replace the speakers. Replace the display panel. Replace the lower EMI shield. Replace the front bezel. Replace the memory. Replace the memory access door. 5. 6. 7. 8. 9. 10. 11. (...)

92 Page 92 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — CPU Fan 92 CPU Fan Tools No tools are required to remove the CPU fan. Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield LCD display Hard Drive Optical drive Speakers Memory Logic board Part Location • • • • • • • • • (...)

93 Page 93 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — CPU Fan 93 Removing the CPU Fan Lift the CPU fan o the white mounting posts. Replacing the CPU Fan Align the CPU fan with the two mounting posts in the rear housing, and push it straight down onto the posts. Note: Route the antenna cable under the fan (as shown above), but pull it aside (to the left side) when installing the logic board. Replace the logic board. Replace the opt (...)

94 Page 94 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive Fan 94 Optical Drive Fan Tools No tools are required to remove the optical drive fan. Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield LCD display Hard Drive Optical drive Speakers Memory Logic board Part Location • • • • • • • • • (...)

95 Page 95 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart — Optical Drive Fan 95 Remove the Optical Drive Fan Lift the optical drive fan straight up and o three mounting posts. Replace the Optical Drive Fan Align and install the optical drive fan on three mounting posts. Push it down snug onto the posts. Replace the logic board. Replace the optical drive. Replace the hard drive. Replace the speakers. Replace the display panel. Replace the (...)

96 Page 96 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Manual iMac (17-inch Mid 2006/Late 2006 CD) Take Apart —Hard Drive Fan 96 Hard Drive Fan Tools No tools are required to remove the optical drive fan. Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield LCD display Hard Drive Optical drive Speakers Memory Logic board Part Location • • • • • • • • • (...)

97 Page 97 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006 CD) Take Apart —Hard Drive Fan 97 Remove the Hard Drive Fan Carefully pull the hard drive fan cable from under the chassis. Lift the hard drive fan straight up and o three mounting posts. Replacing the Hard Drive Fan Route the hard drive fan cable under the metal chassis and above the I/O ports. Align and install the hard drive fan on mounting posts. Push it down snug onto the posts. Replace the l (...)

98 Page 98 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Adapter, Desktop Manual iMac (17-inch Mid 2006/Late 2006) Take Apart — AC Power Inlet 98 AC Power Inlet Tools Removing the AC power inlet requires using the following tools: Torx T10 screwdriver (magnetized) Preliminary Steps Before you begin, follow steps for removing the following: Access door Front bezel Lower EMI shield LCD display Hard Drive Optical drive Speakers Memory Logic board Hard drive fan Part Location • • • • • • • • • • (...)

99 Page 99 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source iMac (17-inch Mid 2006/Late 2006) Take Apart — AC Power Inlet 99 Removing the AC Line Filter Using a torx T10 screwdriver, remove the three self-tapping screws from the power inlet. Using a torx T10 screwdriver, remove the machine screw from the power inlet ground cable. Peel the EMI tape o the power inlet. Disconnect the power inlet-to-power supply cables and unlace the power inlet cable from beneath the chassis. 1. 2. 3. 4. 9 (...)

100 Page 100 of Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo Service source

IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo iMac (17-inch Mid 2006/Late 2006) Take Apart — AC Power Inlet 100 Replacing the AC Line Filter Install the AC power inlet on the rear housing screw mounts with three self tapping screws. Install the power inlet ground cable to the chassis with a machine screw. Route the power inlet cable beneath the chassis as shown in the photo above, and connect it to the power supply. Using EMI tape, securely tape the top and bottom edges of the (...)

Related Devices for Apple IMAC - ALL-IN-ONE DESKTOP - 3.06GHz Intel Core 2 Duo